Package: amd-smi
Description-md5: c13bf349d8c1e6edfdc32bd26656f868
Description-en: AMD System Management Interface - executable
 amdsmi (AMD System Management Interface Library) is a C library for
 Linux providing user space interfaces to monitor and control AMD GPU devices.
 .
 This package provides the amd-smi executable.

Package: apparmor-notify
Description-md5: 181b767ce4be27302f13e475448885ec
Description-en: AppArmor notification system
 apparmor-notify provides a utility to display AppArmor denial
 messages via desktop notifications. The utility can also be used to
 generate summary reports.

Package: ardour
Description-md5: c8bc2c12b9131ae879ae840a96954b51
Description-en: the digital audio workstation
 Ardour is a multichannel hard disk recorder (HDR) and digital audio
 workstation (DAW).  It can be used to control, record, edit and run
 complex audio setups.
 .
 Ardour supports pro-audio interfaces
 through the ALSA project, which provides high quality, well designed
 device drivers and API's for audio I/O under Linux. Any interface
 supported by ALSA can be used with Ardour. This includes the
 all-digital 26 channel RME Hammerfall, the Midiman Delta 1010 and many
 others.
 .
 Ardour has support for 24 bit samples
 using floating point internally, non-linear editing with unlimited undo,
 a user-configurable mixer, MTC master/slave capabilities, MIDI hardware
 control surface compatibility.
 .
 It supports MIDI
 Machine Control, and so can be controlled from any MMC controller and
 many modern digital mixers.
 .
 Ardour contains a
 powerful multitrack audio editor/arranger that is completely
 non-destructive and capable of all standard non-linear editing
 operations (insert, replace, delete, move, trim, select,
 cut/copy/paste). The editor has unlimited undo/redo capabilities and can
 save independent "versions" of a track or an entire piece
 .
 Ardour's editor supports the community-developed LADSPA
 plugin standard.  Arbitrary chains of plugins can be attached to any
 portion of a track.  Every mixer strip can have any number of inputs
 and outputs, not just mono, stereo or 5.1.  An N-way panner is
 included, with support for various panning models.  Pre- and post-fader
 sends exist, each with their own gain and pan controls.  Every mixer
 strip acts as its own bus, and thus the bus count in Ardour is
 unlimited.  You can submix any number of strips into another
 strip.
 .
 Ardour's channel capacity is limited only
 by the number on your audio interface and the ability of your disk
 subsystem to stream the data back and forth.
 .
 JACK
 (the JACK Audio Connection Kit) is used for all audio I/O, permitting
 data to be exchanged in perfect samplesync with other applications
 and/or hardware audio interfaces.
 .
 Ardour is
 sample rate and size neutral - any hardware formats from 8 to 32 bits,
 and rates from 8kHz to 192kHz.  Internal processing in 32/64 bit IEEE
 floating point format.
 .
 Further information can be
 found at <https://ardour.org/>.

Package: ardour-data
Description-md5: 4ded9cf3260ffb84c002d9516a4ead91
Description-en: digital audio workstation (data)
 Ardour is a multichannel hard disk recorder (HDR) and digital audio
 workstation (DAW).  It can be used to control, record, edit and run
 complex audio setups.
 .
 This package contains the architecture-independent data files.

Package: ardour-lv2-plugins
Description-md5: 672ded533d37a8baccc2568c4f871acb
Description-en: digital audio workstation - lv2 plugins set
 Ardour is providing a set of LV2 plugins:
 * a-comp.lv2
 - a compressor (mono & stereo versions)
 * a-exp.lv2
 - an expander (mono & stereo versions)
 * a-delay.lv2
 - a delay (mono version)
 * a-eq.lv2
 - an equaliser (mono version)
 * a-reverb.lv2
 - a reverberation (stereo version)
 * a-fluidsynth.lv2
 - a SF2 player (stereo version)
 * reasonablesynth.lv2
 - a reasonably good piano synth (stereo version)
 .
 This package allows these to be used by other hosts as well.

Package: ardour-video-timeline
Description-md5: a011c8553d01c1a76ef7a4a0fe4ca2dd
Description-en: digital audio workstation - video timeline
 Ardour is a multichannel hard disk recorder (HDR) and digital audio
 workstation (DAW).  It can be used to control, record, edit and run
 complex audio setups.
 .
 This is a dependency package to add video timeline capabilities to ardour.

Package: audispd-plugins
Description-md5: c26f63ffa7afd772d352e8391f3ed311
Description-en: Plugins for the audit event dispatcher
 This package provides plugins for the real-time interface to the audit system,
 audispd. These plugins can do things like relay events to remote machines or
 analyze events for suspicious behavior.

Package: cinnamon
Description-md5: 85a575fee9af55bc8d39cbd88a551b9d
Description-en: Innovative and comfortable desktop
 Cinnamon is a desktop environment which provides advanced innovative
 features and a traditional user experience.
 .
 The desktop layout is similar to GNOME 2.  The underlying technology is
 forked from gnome-shell.  The emphasis is put on making users feel at home
 and providing them with an easy to use and comfortable desktop experience.

Package: cinnamon-common
Description-md5: e46179d94fb5e328c6af58cab1200e40
Description-en: Innovative and comfortable desktop (Common data files)
 Cinnamon is a desktop environment which provides advanced innovative
 features and a traditional user experience.
 .
 The desktop layout is similar to GNOME 2.  The underlying technology is
 forked from gnome-shell.  The emphasis is put on making users feel at home
 and providing them with an easy to use and comfortable desktop experience.
 .
 This package contains the data files needed by Cinnamon

Package: cinnamon-doc
Description-md5: 9ef440ff71ad9c38463c3f77c6c0dff0
Description-en: Innovative and comfortable desktop (Documentation)
 Cinnamon is a desktop environment which provides advanced innovative
 features and a traditional user experience.
 .
 The desktop layout is similar to GNOME 2.  The underlying technology is
 forked from gnome-shell.  The emphasis is put on making users feel at home
 and providing them with an easy to use and comfortable desktop experience.
 .
 This package contains the documentation files distributed with Cinnamon.

Package: cloud-init-cloud-sigma
Description-md5: 838596c3d65b6aa6ba3bf9229053601e
Description-en: Cloud Sigma specific cloud-init
 This metapackage depends on cloud-init-base and additional packages for
 Cloud Sigma.

Package: cloud-init-smart-os
Description-md5: cf64b2d72dcca1e78fe3587b4feedd95
Description-en: Smart OS specific cloud-init
 This metapackage depends on cloud-init-base and additional packages for
 Smart OS.

Package: dh-apparmor
Description-md5: c7bc3728b9d5d471c45d2a640c36d87f
Description-en: AppArmor debhelper routines
 dh-apparmor provides the debhelper tools used to install and migrate
 AppArmor profiles. This is normally used from package maintainer scripts
 during install and removal.

Package: doca-ofed-26.01-dkms
Description-md5: 814c29b4f166adc9d3ca86f4fd4a96ee
Description-en: DKMS support for NVIDIA DOCA-OFED kernel modules
 This package provides integration with the DKMS infrastructure for
 automatically building out of tree kernel modules.
 .
 This package provides the source code for the DOCA-OFED kernel modules.
 .
 This package contains the source to be built with dkms.

Package: doca-ofed-3.4-dkms
Description-md5: 814c29b4f166adc9d3ca86f4fd4a96ee
Description-en: DKMS support for NVIDIA DOCA-OFED kernel modules
 This package provides integration with the DKMS infrastructure for
 automatically building out of tree kernel modules.
 .
 This package provides the source code for the DOCA-OFED kernel modules.
 .
 This package contains the source to be built with dkms.

Package: drkonqi
Description-md5: 7ded47e7fb6635c256d1bc0a50d9f4a6
Description-en: Crash handler for Qt applications
 Drkonqi shows a dialog for dealing with application crashes.
 .
 Drkonqi also doesn't technically require a process to actually crash, you
 can simply run it manually on any old pid. Do note that in most cases you
 only need to define the pid, however not giving certain cmdline options can
 change behavior somewhat drastically (e.g. kdeinit vs. notkdeinit behaves
 radically different as far as process name detection goes) . Drkonqi has a
 number of backends that may be used. Backends are stacked by order of
 preference, backends in the directory of the binary are most preferred.
 This means that you can dump debuggers/internal/ into your build's bin/
 directory and override for example gdb. This essentially allows you to
 replace the gdb debugger with a cat of a fixture file to not have to trace
 live processes at all.

Package: efi-shell-aa64
Description-md5: 148e69dcdf98514fabee21516b756811
Description-en: UEFI Shell for 64-bit ARM architecture
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellaa64.efi binary for the 64-bit ARM
 architecture.

Package: efi-shell-aa64-hwe
Description-md5: 7dce0b9f67d1e0810ee3fa612a2fcea8
Description-en: UEFI Shell for 64-bit ARM architecture
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellaa64.efi binary for the 64-bit ARM
 architecture.

Package: efi-shell-loongarch64
Description-md5: d87dcb728bf4c723c54605d78aeaf01a
Description-en: UEFI Shell for 64-bit LoongArch architecture
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellloongarch64.efi binary for the 64-bit LoongArch
 architecture.

Package: efi-shell-loongarch64-hwe
Description-md5: 6169ed9b366c48c528192895c2a2a1e3
Description-en: UEFI Shell for 64-bit LoongArch architecture
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellloongarch64.efi binary for the 64-bit LoongArch
 architecture.

Package: efi-shell-riscv64
Description-md5: 3bbadf85ee08cb7a48791fb72727234d
Description-en: UEFI Shell for 64-bit RISC-V architecture
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellriscv64.efi binary for the 64-bit RISC-V
 architecture.

Package: efi-shell-riscv64-hwe
Description-md5: 3bfb4c58260f826b1f4e67a769b49b41
Description-en: UEFI Shell for 64-bit RISC-V architecture
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellriscv64.efi binary for the 64-bit RISC-V
 architecture.

Package: efi-shell-x64
Description-md5: 319d03d6ee48666c5aabf29cd2548e18
Description-en: UEFI Shell for 64-bit x86 architecture
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellx64.efi binary for the 64-bit x86
 architecture.

Package: efi-shell-x64-hwe
Description-md5: 24648e386fcf4fd7f2cc47fe09b9d537
Description-en: UEFI Shell for 64-bit x86 architecture
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 The UEFI Shell provides a command line interface running on top of the EFI API.
 It can be used to execute EFI binaries, to manage EFI variables and boot
 options, or to display details of installed devices, drivers, and protocols.
 This package contains the shellx64.efi binary for the 64-bit x86
 architecture.

Package: fdb5
Description-md5: b8113b83d8359805cf69e95c307929ba
Description-en: Utilities for the FDB Fields Database
 FDB (Fields DataBase) is a domain-specific object store developed
 at ECMWF for storing, indexing and retrieving GRIB data.
 Each GRIB message is stored as a field and indexed trough semantic metadata
 (i.e. physical variables such as temperature, pressure, ...).
 A set of fields can be retrieved specifying a request using
 a specific language developed for accessing the MARS Archive.

Package: fence-agents-ack-manual
Description-md5: 0507ce0119793c41c3b1e136cec731d1
Description-en: Fence Agents for Red Hat Cluster - manual ack agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ack_manual tells fenced to stop retrying and consider the node fenced.
 .
 It is important that this only be done after the node has been manually turned
 off or prevented from writing to shared storage.  Without this manual action
 and verification, the storage that fencing protects may become corrupted.

Package: fence-agents-aliyun
Description-md5: 97e013255e09168670593066d5012820
Description-en: Fence Agents for Red Hat Cluster - Aliyun agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides an I/O fencing agent for Aliyun Web Services in Alibaba
 Cloud.
 .
 Note: This agent requires Aliyun Python SDK to be functional.

Package: fence-agents-alom
Description-md5: 3e33fd8c96316599fcd7cd626ccad69c
Description-en: Fence Agents for Red Hat Cluster - Sun ALOM agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_alom is an I/O Fencing agent which can be used with ALOM connected
 machines.

Package: fence-agents-amt
Description-md5: 640e8659110cad8b86cb12b76a52d28d
Description-en: Fence Agents for Red Hat Cluster - Intel AMT agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_amt is an I/O Fencing agent which can be used with Intel AMT.

Package: fence-agents-apc
Description-md5: 0f7ba1c94d207bb336b88ae528b39702
Description-en: Fence Agents for Red Hat Cluster - APC over telnet/ssh agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_apc is an I/O Fencing agent which can be used with the APC network power
 switch. It logs into device via telnet/ssh  and reboots a specified outlet.
 Lengthy telnet/ssh connections should be avoided while a GFS cluster is running
 because the connection will block any necessary fencing actions.

Package: fence-agents-apc-snmp
Description-md5: 03da8cb080c0bde1ba9bce4d2d0bf923
Description-en: Fence Agents for Red Hat Cluster - APC over SNMP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides an I/O Fencing agents which can be used with the APC
 network power switch or Tripplite PDU devices. It logs into a device via SNMP
 and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all
 combinations of authenticity/privacy settings.

Package: fence-agents-aws
Description-md5: 1d30ba83562b5c0c3c5c89c0214e8bed
Description-en: Fence Agents for Red Hat Cluster - AWS agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_aws is an I/O Fencing agent for AWS (Amazon Web Services). It uses the
 boto3 library to connect to AWS.

Package: fence-agents-aws-vpc-net
Description-md5: 55d9806e95c34348b4a8597b279dd983
Description-en: Fence Agents for Red Hat Cluster - AWS VPC agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_aws_vpc is a Network and Power Fencing agent for AWS VPC that works by
 manipulating security groups. It uses the boto3 library to connect to AWS.

Package: fence-agents-azure-arm
Description-md5: 69b52b4da35b465159f953b34e0a8ced
Description-en: Fence Agents for Red Hat Cluster - Azure ARM agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_azure_arm is an I/O Fencing agent for Azure Resource Manager. It uses
 Azure SDK for Python to connect to Azure.

Package: fence-agents-bladecenter
Description-md5: 0c68d03022cb48823f11457cf8e92793
Description-en: Fence Agents for Red Hat Cluster - IBM BladeCenter telnet agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_bladecenter is an I/O Fencing agent which can be used with IBM
 BladeCenters with recent enough firmware that includes telnet support. It logs
 into a Brocade chasis via telnet or ssh and uses the command line interface to
 power on and off blades.

Package: fence-agents-brocade
Description-md5: e7c5b181378ac254537a05e656003b5f
Description-en: Fence Agents for Red Hat Cluster - HP Brocade agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_brocade is an I/O Fencing agent which can be used with Brocade FC
 switches. It logs into a Brocade switch via telnet and disables a specified
 port. Disabling the port which a machine is connected to effectively fences
 that machine. Lengthy telnet connections to the switch should be avoided while
 a GFS cluster is running because the connection will block any necessary
 fencing actions.

Package: fence-agents-cdu
Description-md5: 75458c1fbd752e9273367ef4628386da
Description-en: Fence Agents for Red Hat Cluster - Sentry Switch CDU agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_cdu is an I/O Fencing agent which can be used with the Sentry Switch
 CDU. It logs into the device via telnet and power's on/off an outlet.

Package: fence-agents-cisco-mds
Description-md5: 0eb8ade260df2ba90e9792e96377c9f9
Description-en: Fence Agents for Red Hat Cluster - Cisco MDS agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_cisco_mds is an I/O Fencing agent which can be used with any Cisco MDS
 9000 series with SNMP enabled device.

Package: fence-agents-cisco-ucs
Description-md5: b1dbe3827bebdcbb5e259ab2f84f22f5
Description-en: Fence Agents for Red Hat Cluster - Cisco UCS agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to
 fence machines.

Package: fence-agents-compute
Description-md5: 429081e2a20251c5fd194b22d8608ec3
Description-en: Fence Agents for Red Hat Cluster - OpenStack Compute agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 It tells Nova that compute nodes are down and to reschedule flagged instances.

Package: fence-agents-crosslink
Description-md5: fc13f5cd65acd432738f7efdeeb0e01d
Description-en: Fence Agents for Red Hat Cluster - crosslink cable agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides an agent that helps two-node clusters to tackle the
 situation where one node lost power and cannot be fenced by telling pacemaker
 that if the node is not reachable over the crosslink cable, it can be assumed
 to be dead.

Package: fence-agents-cyberpower-ssh
Description-md5: 8998d01341bf61af08e992baebdbab25
Description-en: Fence Agents for Red Hat Cluster - CyberPower agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_cyberpower_ssh is an I/O Fencing agent which can be used with the
 CyberPower network power switch. It logs into device via ssh and reboots a
 specified outlet. Lengthy ssh connections should be avoided while a GFS cluster
 is running because the connection will block any necessary fencing actions.

Package: fence-agents-docker
Description-md5: e30fed7f30b31f9de26ea8a2a37181c5
Description-en: Fence Agents for Red Hat Cluster - Docker agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_docker is I/O fencing agent which can be used with the Docker Engine
 containers. You can use this fence-agent without any authentication, or you can
 use TLS authentication.

Package: fence-agents-drac
Description-md5: 322de10836dd031818630ef99061413e
Description-en: Fence Agents for Red Hat Cluster - Dell DRAC 4 agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_drac is an I/O Fencing agent which can be used with the Dell Remote
 Access Card (DRAC). This card provides remote access to controlling power to a
 server. It logs into the DRAC through the telnet interface of the card.

Package: fence-agents-drac5
Description-md5: ff3db443d436260317b1c12456c61e06
Description-en: Fence Agents for Red Hat Cluster - Dell DRAC 5 agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_drac5 is an I/O Fencing agent which can be used with the Dell Remote
 Access Card v5 or CMC (DRAC). This device provides remote access to controlling
 power to a server. It logs into the DRAC through the telnet/ssh interface of
 the card.

Package: fence-agents-dummy
Description-md5: ce24144935ae96b9c29bac5b9b55349a
Description-en: Fence Agents for Red Hat Cluster - dummy agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agent used for testing purpose.

Package: fence-agents-eaton-snmp
Description-md5: f48c8bb83a21bb56aa17f8ed93606734
Description-en: Fence Agents for Red Hat Cluster - Eaton SNMP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_eaton_snmp is an I/O Fencing agent which can be used with the Eaton
 network power switch. It logs into a device via SNMP and reboots a specified
 outlet. It supports SNMP v1 and v3 with all combinations of
 authenticity/privacy settings.

Package: fence-agents-eaton-ssh
Description-md5: 91f37f903723af156d16c014ba175eb6
Description-en: Fence Agents for Red Hat Cluster - Eaton SSH agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_eaton_ssh is a Power Fencing agent that connects to Eaton ePDU devices.
 It logs into device via ssh and reboot a specified outlet.

Package: fence-agents-ecloud
Description-md5: 9e7f5adc04848dbf0723fd2384891f30
Description-en: Fence Agents for Red Hat Cluster - ANS eCloud agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ecloud is a fence agent for use with the ANS eCloud platform which is
 compatible with eCloud VPC and eCloud v1.

Package: fence-agents-emerson
Description-md5: 559402fbc328dbd764ce62c9c9860f23
Description-en: Fence Agents for Red Hat Cluster - Emerson SNMP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_emerson is an I/O Fencing agent which can be used with MPX and MPH2
 managed rack PDU.

Package: fence-agents-eps
Description-md5: 51071cb1fc5d5dcce4623e370f77b8be
Description-en: Fence Agents for Red Hat Cluster - ePowerSwitch agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+
 power switch to fence connected machines. Fence agent works ONLY on 8M+ device,
 because this is only one, which has support for hidden page feature.
 .
 fence_epsr2 is an I/O Fencing agent for ePowerSwitch R2 and newer. In most
 cases you want to use fence_epsr2, as fence_eps only works with older
 hardware.

Package: fence-agents-extra
Description-md5: aa174fa7aaa56b8654f24163b7e90983
Description-en: Fence Agents for Red Hat Cluster non-curated by Ubuntu
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package is a metapackage depending on all available fence agents which
 are not curated by the Ubuntu Server team. The agents which are not curated by
 Ubuntu are not officially supported.

Package: fence-agents-gce
Description-md5: c9f20161b18c281129c86c0c705cf902
Description-en: Fence Agents for Red Hat Cluster - Google Compute Engine agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_gce is an I/O Fencing agent for GCE (Google Cloud Engine). It uses the
 googleapiclient library to connect to GCE.

Package: fence-agents-hds-cb
Description-md5: a36c9ecee107ad401e2283414a2dcd96
Description-en: Fence Agents for Red Hat Cluster - Hitachi Compute Blade agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_hds_cb is an I/O Fencing agent which can be used with Hitachi Compute
 Blades with recent enough firmware that includes telnet support.

Package: fence-agents-hetzner-cloud
Description-md5: be2c30a5c5c89879050121120b917d7c
Description-en: Fence Agents for Red Hat Cluster - Hetzner Cloud agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_hetzner_cloud is a Power Fencing agent which can be used with Hetzner
 Cloud via its API to fence cloud servers.

Package: fence-agents-heuristics-ping
Description-md5: ff63da2f881cb986db23fa197ef8084c
Description-en: Fence Agents for Red Hat Cluster - heuristics ping agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_heuristics_ping uses ping-heuristics to control execution of another
 fence agent on the same fencing level.
 .
 This is not a fence agent by itself. Its only purpose is to enable/disable
 another fence agent that lives on the same fencing level but after
 fence_heuristics_ping.

Package: fence-agents-hpblade
Description-md5: a30c8cd35af6b8c00735fc0f6368b229
Description-en: Fence Agents for Red Hat Cluster - HPE BladeSystem agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_hpblade is an I/O Fencing agent which can be used with HPE BladeSystem
 and HPE Integrity Superdome X. It logs into the onboard administrator of an
 enclosure via telnet or ssh and uses the command line interface to power blades
 or partitions on or off.

Package: fence-agents-ibm-powervs
Description-md5: 21d57ea45d7a0f53d1b2490ec549d63d
Description-en: Fence Agents for Red Hat Cluster - IBM PowerVS agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ibm_powervs is an I/O Fencing agent which can be used with IBM PowerVS
 to fence virtual machines.

Package: fence-agents-ibm-vpc
Description-md5: 2fac56a6372d2ea958a4a1c07ca970e7
Description-en: Fence Agents for Red Hat Cluster - IBM Cloud VPC agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ibm_vpc is an I/O Fencing agent which can be used with IBM Cloud VPC to
 fence virtual machines.

Package: fence-agents-ibmblade
Description-md5: ddd9beb8aa71b38ad49a10b42d2e3cd2
Description-en: Fence Agents for Red Hat Cluster - IBM BladeCenter SNMP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter
 chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering
 up or down the specified Blade Server.

Package: fence-agents-ibmz
Description-md5: ad60fe4c9b6c970ef6467205d4b07461
Description-en: Fence Agents for Red Hat Cluster - IBM zSystems agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ibmz is a power fencing agent which uses the HMC Web Services API to
 fence IBM zSystems LPARs.

Package: fence-agents-ifmib
Description-md5: b456e8c0cc5a19e8759f22f9f7ce40d9
Description-en: Fence Agents for Red Hat Cluster - IF-MIB SNMP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ifmib is an I/O Fencing agent which can be used with any SNMP IF-MIB
 capable device.
 .
 It was written with managed ethernet switches in mind, in order to fence iSCSI
 SAN connections. However, there are many devices that support the IF-MIB
 interface. The agent uses IF-MIB::ifAdminStatus to control the state of an
 interface.

Package: fence-agents-ilo-moonshot
Description-md5: 8427c6e12438382be84d4354c5bf4ce4
Description-en: Fence Agents for Red Hat Cluster - HP Moonshot iLO agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agent for HP iLO Moonshot devices that are accessed via telnet or SSH.

Package: fence-agents-ilo-mp
Description-md5: 8ee910aaa0f0b26aa514c1e5be459932
Description-en: Fence Agents for Red Hat Cluster - HP iLO MP agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agent for HP Integrated Lights-Out Management Processor devices that are
 accessed via telnet or SSH.

Package: fence-agents-ilo-ssh
Description-md5: 4ec8b8af771097c0976b4e61ae53fb31
Description-en: Fence Agents for Red Hat Cluster - HP iLO over SSH agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ilo_ssh is a fence agent that connects to iLO device. It logs into
 device via ssh and reboot a specified outlet.

Package: fence-agents-ilo2
Description-md5: a632a4770fbd0beee0df234fe04db3f3
Description-en: Fence Agents for Red Hat Cluster - HP iLO2 agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agents for HP iLO2 devices that are accessed via the HTTP(s) protocol.

Package: fence-agents-intelmodular
Description-md5: da02370e905e0ca40b2e2e96514d5e30
Description-en: Fence Agents for Red Hat Cluster - Intel Modular agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_intelmodular is an I/O Fencing agent which can be used with Intel
 Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well).

Package: fence-agents-ipdu
Description-md5: cf38f1fa527622aa0dd652dfc9781c54
Description-en: Fence Agents for Red Hat Cluster - IBM iPDU agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ipdu is an I/O Fencing agent which can be used with the IBM iPDU network
 power switch. It logs into a device via SNMP and reboots a specified outlet. It
 supports SNMP v3 with all combinations of authenticity/privacy settings.

Package: fence-agents-ironic
Description-md5: f83cd52a4fd785beda74a3f3d3afe15d
Description-en: Fence Agents for Red Hat Cluster - OpenStack Ironic agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ironic is a Fencing agent which can be used with machines controlled by
 the Ironic (Bare Metal as a service) service. This agent calls the openstack
 CLI.

Package: fence-agents-kdump
Description-md5: 1154667d65fb5ebaf88a1d28f5ae4639
Description-en: Fence Agents for Red Hat Cluster - kdump agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_kdump is an I/O fencing agent to be used with the kdump crash recovery
 service. When the fence_kdump agent is invoked, it will listen for a message
 from the failed node that acknowledges that the failed node it executing the
 kdump crash kernel.  Note that fence_kdump is not a replacement for traditional
 fencing methods. The fence_kdump agent can only detect that a node has entered
 the kdump crash recovery service. This allows the kdump crash recovery service
 complete without being preempted by traditional power fencing methods.

Package: fence-agents-kubevirt
Description-md5: 6af69117a339bb269fca55369602a7b9
Description-en: Fence Agents for Red Hat Cluster - KubeVirt agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_kubevirt is an I/O Fencing agent for KubeVirt.

Package: fence-agents-ldom
Description-md5: a255b6c93c9de070630e7a5997a17352
Description-en: Fence Agents for Red Hat Cluster - Sun LDom agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ldom is an I/O Fencing agent which can be used with LDoms virtual
 machines. This agent works so, that run ldm command on host machine.

Package: fence-agents-lindy-pdu
Description-md5: 7aaccfa9efaa9f5f5b4b78f9fcec7bce
Description-en: Fence Agents for Red Hat Cluster - Lindy PDU agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_lindypdu is an I/O Fencing agent which can be used with the Lindy PDU
 network power switch. It logs into a device via SNMP and reboots a specified
 outlet. It supports SNMP v1 with all combinations of authenticity/privacy
 settings.

Package: fence-agents-lpar
Description-md5: b6cb228a9ba611a08cd95240b2b7fc0b
Description-en: Fence Agents for Red Hat Cluster - IBM LPAR agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agent for IBM LPAR devices that are accessed via telnet or SSH.

Package: fence-agents-netio
Description-md5: ce9f33e5baf3114ce1235ad0f71405c2
Description-en: Fence Agents for Red Hat Cluster - Koukaam NETIO-230B agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides an I/O Fencing agent which can be used with the Koukaam
 NETIO-230B Power Distribution Unit. It logs into device via telnet and reboots
 a specified outlet. Lengthy telnet connections should be avoided while the
 cluster is running because the connection will block any necessary fencing
 actions.

Package: fence-agents-nutanix-ahv
Description-md5: f747a9a969287eba35b4a55114eeee45
Description-en: Fence Agents for Red Hat Cluster - Nutanix AHV agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides a Power Fencing agent for virtual machines deployed on
 Nutanix AHV cluster with the AHV cluster being managed by Prism Central.

Package: fence-agents-openstack
Description-md5: 9d94306a1bef97617d8560b52e05fb5c
Description-en: Fence Agents for Red Hat Cluster - OpenStack Nova agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_openstack is a Fencing agent which can be used with machines controlled
 by the OpenStack's Nova service.

Package: fence-agents-ovh
Description-md5: 2d17bb13ea5cf2c4a0df7fec7750d3b8
Description-en: Fence Agents for Red Hat Cluster - OVH agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ovh is an Power Fencing agent which can be used within OVH datecentre.
 Poweroff is simulated with a reboot into rescue-pro mode.

Package: fence-agents-ovm
Description-md5: cfb9324519bee2f00e952365e439b681
Description-en: Fence Agents for Red Hat Cluster - Oracle VM agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_ovm is a Power Fencing agent which can be used with the virtual machines
 managed by Oracle VM Manager.

Package: fence-agents-powerman
Description-md5: 7d75ab07871bcb5914aa37fd2a3cff55
Description-en: Fence Agents for Red Hat Cluster - Powerman agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides a fence agent for the Powerman management utility that
 was designed for LLNL systems.

Package: fence-agents-pve
Description-md5: 426b47a6c27221b9d8e1cf5eec367818
Description-en: Fence Agents for Red Hat Cluster - Proxmox VE agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_pve agent can be used to fence virtual machines acting as nodes in a
 virtualized cluster.

Package: fence-agents-raritan
Description-md5: 3f488c9f776af7b88f2193137f6cb44e
Description-en: Fence Agents for Red Hat Cluster - Raritan Dominion PX agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_raritan is an I/O Fencing agent which can be used with the Raritan
 DPXS12-20 Power Distribution Unit. It logs into device via telnet and reboots a
 specified outlet. Lengthy telnet connections should be avoided while a GFS
 cluster is running because the connection will block any necessary fencing
 actions.

Package: fence-agents-raritan-px3
Description-md5: 03e7c5d63724fe369ab3c95f9dd69716
Description-en: Fence Agents for Red Hat Cluster - Raritan Dominion PX2/PX3 agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_raritan is an I/O Fencing agent which can be used with the Raritan PX2
 and PX3 Power Distribution Unit series. It logs into device via telnet or ssh
 and reboots a specified outlet. Single outlets and grouped outlets are
 supported.

Package: fence-agents-rcd-serial
Description-md5: e5f3ced3125f0c0cd766943850f6d4f8
Description-en: Fence Agents for Red Hat Cluster - RCD serial agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_rcd_serial operates a serial cable that toggles a reset of an opposing
 server using the reset switch on its motherboard. The cable itself is simple
 with no power, network or moving parts.

Package: fence-agents-redfish
Description-md5: f1a9eeb432f8c659ff928b8011106c84
Description-en: Fence Agents for Red Hat Cluster - Redfish agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_redfish is an I/O Fencing agent which can be used with Out-of-Band
 controllers that support Redfish APIs. These controllers provide remote access
 to control power on a server.

Package: fence-agents-rhevm
Description-md5: bdc11fadcd21a84bfc67d15fb1839d33
Description-en: Fence Agents for Red Hat Cluster - RHEV-M REST API agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_rhevm is an I/O Fencing agent which can be used with RHEV-M REST API to
 fence virtual machines.

Package: fence-agents-rsa
Description-md5: 48c53bef94f851360628773bd00efce2
Description-en: Fence Agents for Red Hat Cluster - IBM RSA agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II
 management interface. It logs into an RSA II device via telnet and reboots the
 associated machine. Lengthy telnet connections to the RSA II device should be
 avoided while a GFS cluster is running because the connection will block any
 necessary fencing actions.

Package: fence-agents-rsb
Description-md5: e48d290ca840010bf93f8d2d9b59f5a1
Description-en: Fence Agents for Red Hat Cluster - Fujitsu-Siemens RSB agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_rsb is an I/O Fencing agent which can be used with the Fujitsu-Siemens
 RSB management interface. It logs into device via telnet/ssh and reboots a
 specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS
 cluster is running because the connection will block any necessary fencing
 actions.

Package: fence-agents-sanbox2
Description-md5: f0c0f9272830b4c13e60a0c4916d5439
Description-en: Fence Agents for Red Hat Cluster - QLogic SANBox2 FC switch agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC
 switches. It logs into a SANBox2 switch via telnet and disables a specified
 port.

Package: fence-agents-shelly
Description-md5: bf44a2163b1202e1d257303ef32dcc8b
Description-en: Fence Agents for Red Hat Cluster - Shelly agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_shelly_gen2 is a Power Fencing agent which can be used with Shelly
 Switches supporting the gen 2+ API to fence attached hardware.

Package: fence-agents-skalar
Description-md5: d84002fa5206383f91af0d134bff4a23
Description-en: Fence Agents for Red Hat Cluster - Skala-R agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 Fence agent used to manage nodes in Skala-R.

Package: fence-agents-vbox
Description-md5: 389cb976fd34082ec6036a8c71fd29d2
Description-en: Fence Agents for Red Hat Cluster - VirtualBox agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_vbox is an I/O Fencing agent which can be used with the virtual machines
 managed by VirtualBox. It logs via ssh to a dom0 where it runs VBoxManage to do
 all of the work.

Package: fence-agents-vmware
Description-md5: 4402f3b8a592d42709879709012857f2
Description-en: Fence Agents for Red Hat Cluster - VMware agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides an I/O Fencing agent which can be used with the VMware
 ESX, VMware ESXi or VMware Server to fence virtual machines.
 .
 Before using this agent, VI Perl Toolkit or vmrun command needs to be
 installed on every machine running this agent.

Package: fence-agents-vmware-rest
Description-md5: a95e75e3de1d10902c4fb809fe22c509
Description-en: Fence Agents for Red Hat Cluster - VMware REST API agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_vmware_rest is an I/O Fencing agent which can be used with VMware API to
 fence virtual machines.

Package: fence-agents-vmware-soap
Description-md5: 9f6cf5e8b234dc6bf56e84a5a402c674
Description-en: Fence Agents for Red Hat Cluster - VMware SOAP API agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_vmware_soap is an I/O Fencing agent which can be used with the virtual
 machines managed by VMWare products that have SOAP API v4.1+.

Package: fence-agents-vmware-vcloud
Description-md5: 986b8eeb41d63b3c38fc34034395d832
Description-en: Fence Agents for Red Hat Cluster - VMware vCloud Director API agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_vmware_vcloud is an I/O Fencing agent which can be used with VMware
 vCloud Director API to fence virtual machines.

Package: fence-agents-wti
Description-md5: 3c3abb8fd7c5e12483e44cb1776188fd
Description-en: Fence Agents for Red Hat Cluster - WTI Network Power Switch agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_wti is an I/O Fencing agent which can be used with the WTI Network Power
 Switch (NPS). It logs into an NPS via telnet or ssh and boots a specified plug.
 Lengthy telnet connections to the NPS should be avoided while a GFS cluster is
 running because the connection will block any necessary fencing actions.

Package: fence-agents-xenapi
Description-md5: 9572e693325b40ef58e45b24756e8108
Description-en: Fence Agents for Red Hat Cluster - Citrix XenServer agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 fence_xenapi is an I/O Fencing agent used on Citrix XenServer hosts. It uses
 the XenAPI, supplied by Citrix, to establish an XML-RPC session to a XenServer
 host. Once the session is established, further XML-RPC commands are issued in
 order to switch on, switch off, restart and query the status of virtual
 machines running on the host.

Package: fence-agents-zvm
Description-md5: 15faa50240b7b7a7348490a9f32dc8fe
Description-en: Fence Agents for Red Hat Cluster - IBM z/VM agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 This package provides a fencing agent for z/VM virtual machines using SMAPI
 service over TCP/IP.

Package: fence-virt
Description-md5: 3ac7dbd88407d4d5712cd27d5b4d7553
Description-en: Fence Agents for Red Hat Cluster - virt agent
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 The fencing framework consists of the agent (fence_virt) and
 the host daemon (fence_virtd). The fence_virtd host daemon is
 responsible for processing fencing requests from fence_virt agents
 running in virtual machines and routing the requests to the
 appropriate physical machine for action.
 .
 This package contains the fence_virt agent to be used inside the
 virtual machine.

Package: fence-virtd
Description-md5: 240ffb96b8f5cd8be1e210c0cd48254a
Description-en: Fence Agents for Red Hat Cluster - virt daemon
 Red Hat Fence Agents is a collection of scripts to handle remote power
 management for several devices. They allow failed or unreachable nodes to be
 forcibly restarted and removed from the cluster.
 .
 The fencing framework consists of the agent (fence_virt) and
 the host daemon (fence_virtd). The fence_virtd host daemon is
 responsible for processing fencing requests from fence_virt agents
 running in virtual machines and routing the requests to the
 appropriate physical machine for action.
 .
 This package contains the fence_virtd daemon to be used on the
 physical host.

Package: fonts-powerline
Description-md5: df8954c2cf3fddab0b3bcde6cb143031
Description-en: prompt and statusline utility (symbols font)
 Powerline is a statusline plugin for vim, and provides statuslines and prompts
 for several other applications, including zsh, bash, tmux, IPython, Awesome and
 Qtile.
 .
 This package contains the font which provides symbols used by Powerline. It
 also contains the fontconfig settings that makes these symbols available as
 part of other installed fonts.

Package: frama-c-base
Description-md5: 7f776b4ce1b1b979abde4a0a5b4fab94
Description-en: Platform dedicated to the analysis of source code written in C
 Frama-C gathers several analysis techniques in a single collaborative
 framework, based on analyzers (called "plug-ins") that can build upon the
 results computed by other analyzers in the framework.
 .
 Thanks to this approach, Frama-C provides sophisticated tools, including:
 * an analyzer based on abstract interpretation (Value plug-in);
 * a program proof framework based on weakest precondition calculus
 (WP plug-in);
 * a program slicer (Slicing plug-in);
 * a tool for verification of temporal (LTL) properties (Aoraï plug-in);
 * several tools for code base exploration and dependency analysis
 (plug-ins From, Impact, Metrics, Occurrence, Scope, etc.).
 .
 These plug-ins communicate between each other via the Frama-C API
 and via ACSL (ANSI/ISO C Specification Language) properties.
 .
 This package provides the library of Frama-c which is useful to build
 plugins for Frama-c, the command-line tools, and the graphical interface.

Package: fwupd-amd64-signed-template
Description-md5: 19d35f78650aadabde42d595495fc832
Description-en: Template for signed fwupd package
 This package is used to control code signing by the Debian signing
 service.

Package: fwupd-unsigned
Description-md5: 6ac8eb0218063e55ab61f28d7962c47b
Description-en: Firmware update daemon (Unsigned EFI binaries)
 fwupd is a daemon to allow session software to update device firmware.
 You can either use a GUI software manager like GNOME Software to view and
 apply updates, the command-line tool or the system D-Bus interface directly.
 Firmware updates are supported for a variety of technologies.
 See <https://github.com/fwupd/fwupd> for details
 .
 This package provides the EFI binaries used for UEFI capsule updates

Package: fwupd-unsigned-dev
Description-md5: 3762bbf184b5b856c9a9a3196969b9a2
Description-en: Firmware update daemon (Development information)
 fwupd is a daemon to allow session software to update device firmware.
 You can either use a GUI software manager like GNOME Software to view and
 apply updates, the command-line tool or the system D-Bus interface directly.
 Firmware updates are supported for a variety of technologies.
 See <https://github.com/fwupd/fwupd> for details
 .
 This package provides the dependencies for the fwupd daemon to resolve

Package: ghkl
Description-md5: edc3e8a23ed4ecf703e455dd79835036
Description-en: diffractometer computation control application
 The hkl library is a framework for diffraction computation and
 diffractometer control, heavily used at the SOLEIL synchrotron. It
 supports various types of diffractometer geometry: Eulerian 4-circle,
 Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis
 geometry. For each of these it provides several numerically computed
 modes, such as bisector and constant psi.
 .
 This package provides a gui on top of the hkl library.

Package: ghostty
Description-md5: 73f52414181b08a27075f479e19cf9ad
Description-en: Fast, feature-rich, and cross-platform terminal emulator
 Ghostty is a terminal emulator that differentiates itself by being fast,
 feature-rich and native. While there are many excellent terminal emulators
 available, they all force you to choose between speed, features, or native
 UIs. Ghostty provides all three.

Package: gimp
Description-md5: 0c13253910a0a1bd77c64d38c07351a0
Description-en: GNU Image Manipulation Program
 GIMP is an advanced picture editor. You can use it to edit, enhance, and
 retouch photos and scans, create drawings, and make your own images.
 It has a large collection of professional-level editing tools and
 filters, similar to the ones you might find in Photoshop. Numerous
 fine-control settings and features like layers, paths, masks, and
 scripting give you total control over your images.
 .
 Many image file formats are supported, including JPEG, Photoshop (.psd),
 and Paint Shop Pro (.psp) files. It can also be used to scan and print
 photos.
 .
 To open files remotely (like over HTTP), install the gvfs-backends
 package.
 .
 To use a MIDI device (like a musical keyboard) as an input controller in GIMP,
 install libasound2 and read the how-to at /usr/share/doc/gimp/README.MIDI

Package: gimp-data
Description-md5: f70d84aecd044d27d27535082275ce75
Description-en: Data files for GIMP
 This package contains architecture-independent supporting data files
 for use with GIMP.

Package: gir1.2-gimp-3.0
Description-md5: 95e64486abc87bac36416ba061e37043
Description-en: Introspection data for the GIMP library
 This package includes the libgimp libraries, which are necessary to run
 GIMP and third-party GIMP plugins.
 .
 This package can be used by other packages using the GIRepository format
 to generate dynamic bindings for libgimp operations.

Package: gir1.2-hkl-5.0
Description-md5: 7eafb95bafdb4dff92a9ae812015438e
Description-en: diffractometer computation control library - gir binding
 The hkl library is a framework for diffraction computation and
 diffractometer control, heavily used at the SOLEIL synchrotron. It
 supports various types of diffractometer geometry: Eulerian 4-circle,
 Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis
 geometry. For each of these it provides several numerically computed
 modes, such as bisector and constant psi.
 .
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings.

Package: gnocchi-api
Description-md5: e7c870b77ca712a5618255b3e2532740
Description-en: Metric as a Service - API daemon
 Gnocchi is a service for managing a set of resources and storing metrics about
 them, in a scalable and resilient way. Its functionalities are exposed over an
 HTTP REST API.
 .
 This package contains the API server.

Package: gnocchi-common
Description-md5: 1bd56e577a579993460d9e1bb5621308
Description-en: Metric as a Service - common files
 Gnocchi is a service for managing a set of resources and storing metrics about
 them, in a scalable and resilient way. Its functionalities are exposed over an
 HTTP REST API.
 .
 This package contains the common files.

Package: gnocchi-metricd
Description-md5: 0e7f1b702365aa5a9abad215e79c0cc1
Description-en: Metric as a Service - metric daemon
 Gnocchi is a service for managing a set of resources and storing metrics about
 them, in a scalable and resilient way. Its functionalities are exposed over an
 HTTP REST API.
 .
 This package contains the metric daemon.

Package: gnocchi-statsd
Description-md5: fb97bffff7f28c5b8a79dfb320b1120d
Description-en: Metric as a Service - statsd daemon
 Gnocchi is a service for managing a set of resources and storing metrics about
 them, in a scalable and resilient way. Its functionalities are exposed over an
 HTTP REST API.
 .
 This package contains the metric daemon.

Package: gnome-shell-extension-prefs
Description-md5: b750b0280408e85a2232c9f629868acf
Description-en: tool to enable / disable GNOME Shell extensions
 This package contains a tool which users who use Shell extensions can use to
 toggle them on and off, and access their preferences.

Package: golang-github-snapcore-snapd-dev
Description-md5: a2d3a19f6630f9476511151dac13666a
Description-en: snappy development go packages.
 Use these to use the snappy API.

Package: golang-redhat-audit-dev
Description-md5: 7e95a290b19e76ef3df32e571446b04d
Description-en: Go client bindings for the libaudit library
 The package contains the Go bindings to libaudit that only allows for logging
 audit events.
 .
 This package contains the source.

Package: grub-coreboot
Description-md5: db4a244ee1058cab6f43333a109d25ab
Description-en: GRand Unified Bootloader, version 2 (Coreboot version)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
 - Scripting in grub.cfg using BASH-like syntax.
 - Support for modern partition maps such as GPT.
 - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
 add-ons can plug in their own script rules and trigger updates by invoking
 update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with platforms running the Coreboot firmware.  Installing this package
 indicates that this version of GRUB should be the active boot loader.

Package: grub-coreboot-bin
Description-md5: f272000f30dd7cd337730d5bc31d1712
Description-en: GRand Unified Bootloader, version 2 (Coreboot modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
 - Scripting in grub.cfg using BASH-like syntax.
 - Support for modern partition maps such as GPT.
 - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
 add-ons can plug in their own script rules and trigger updates by invoking
 update-grub.
 .
 This package contains GRUB modules that have been built for use with
 platforms running the Coreboot firmware.  It can be installed in parallel
 with other flavours, but will not automatically install GRUB as the active
 boot loader nor automatically update grub.cfg on upgrade unless
 grub-coreboot is also installed.

Package: grub-coreboot-dbg
Description-md5: ee3f45ba8ef408dea3b4e172ff46a041
Description-en: GRand Unified Bootloader, version 2 (Coreboot debug files)
 This package contains debugging files for grub-coreboot-bin.  You only need
 these if you are trying to debug GRUB using its GDB stub.

Package: grub-efi-amd64-signed-template
Description-md5: 6505085992cc3617973cb57dcebc7eeb
Description-en: GRand Unified Bootloader, version 2 (EFI-AMD64 signing template)
 This package contains template files for grub-efi-amd64-signed.
 This is only needed for Secure Boot signing.

Package: grub-emu
Description-md5: eaa24f3f146f8d2e05f7109f088cfa8b
Description-en: GRand Unified Bootloader, version 2 (emulated version)
 This package contains grub-emu, an emulated version of GRUB.  It is only
 provided for debugging purposes.

Package: grub-emu-dbg
Description-md5: 4066695808b06e6425e6d4c1f6d4205e
Description-en: GRand Unified Bootloader, version 2 (emulated debug files)
 This package contains debugging files for grub-emu.  You only need these if
 you are trying to debug GRUB using its GDB stub.

Package: grub-firmware-qemu
Description-md5: cc3754b92a7e1d8e16c04265627088b6
Description-en: GRUB firmware image for QEMU
 This package contains a binary of GRUB that has been built for use as
 firmware for QEMU.  It can be used as a replacement for other PC BIOS
 images provided by seabios, bochsbios, and so on.
 .
 In order to make QEMU use this firmware, simply add `-bios grub.bin' when
 invoking it.
 .
 This package behaves in the same way as GRUB for coreboot, but doesn't
 contain any code from coreboot itself, and is only suitable for QEMU. If
 you want to install GRUB as firmware on real hardware, you need to use the
 grub-coreboot package, and manually combine that with coreboot.

Package: grub-linuxbios
Description-md5: 8d63829707a75c424f8ce33f10391cc0
Description-en: GRand Unified Bootloader, version 2 (dummy package)
 This is a dummy transitional package that depends on grub-coreboot.

Package: grub-rescue-pc
Description-md5: 10cb31f07b8d2654fef82f1297940a5b
Description-en: GRUB bootable rescue images, version 2 (PC/BIOS version)
 This package contains three GRUB rescue images that have been built for use
 with the traditional PC/BIOS architecture:
 .
 - grub-rescue-floppy.img: floppy image.
 - grub-rescue-cdrom.iso: El Torito CDROM image.
 - grub-rescue-usb.img: USB image.

Package: grub-theme-starfield
Description-md5: 52232de4094a1dafa8ade1df40ec6451
Description-en: GRand Unified Bootloader, version 2 (starfield theme)
 This is the default theme for GRUB's graphical menu.

Package: grub-xen-host
Description-md5: 5759b5e1c06b30e6af51012f552c8d3b
Description-en: GRand Unified Bootloader, version 2 (Xen host version)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
 - Scripting in grub.cfg using BASH-like syntax.
 - Support for modern partition maps such as GPT.
 - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
 add-ons can plug in their own script rules and trigger updates by invoking
 update-grub.
 .
 This package arranges for GRUB binary images which can be used to boot a Xen
 guest (i.e. PV-GRUB) to be present in the control domain filesystem.

Package: grub2
Description-md5: bbb470013d1f2450dba730f10fbd09b4
Description-en: GRand Unified Bootloader, version 2 (dummy package)
 This is a dummy transitional package to handle GRUB 2 upgrades.  It can be
 safely removed.

Package: gshutdown
Description-md5: ee97b4df0e39068e484578e7e1eb9f2d
Description-en: Graphical shutdown utility and shutdown timer
 GShutdown is a utility which allows you to schedule the shutdown or restart of
 your computer. With it you can simply and quickly choose the turn off time at
 either a specific time or after a countdown.
 .
 The graphical user interface uses Gtk+2.

Package: kactivitymanagerd
Description-md5: a9bed58e742e6b5388dfcd0771bd567d
Description-en: System service to manage user's activities
 System service to manage user's activities, track the usage patterns
 etc.

Package: kde-config-flatpak
Description-md5: cde36ff85a3f13c5e02779e77c441fea
Description-en: Flatpak permissions management KCM
 Plasma System Settings module for managinng Flatpak permissions.
 .
 The System Settings module allows users to changing what permissions have
 been granted to installed Flatpak applications.

Package: kde-config-updates
Description-md5: 49d08b47023c9b5f6e78bf6f6e4a04e0
Description-en: Unattended updates configuration
 This package contains a configuration module for configuring
 unattended updates for fleet administrators without the need to
 use system updaters manually.
 .
 This package is part of Plasma Discover.

Package: kde-spectacle
Description-md5: 95ca0633f14406ddec3aadca4f76a65b
Description-en: Screenshot capture utility
 Spectacle captures images of the screen. It can capture the whole screen,
 a specified region, an individual window, or only part of a window.

Package: kdeplasma-addons-data
Description-md5: b8d813cf9b8a19ae5d0e99a5ea537b7d
Description-en: locale files for kdeplasma-addons
 The KDE Plasma addons module is a collection of additional Plasma 6
 data engines, widgets and krunner plugins. It is part of
 the official KDE distribution.
 .
 This package contains locale files for KDE Plasma addons module.

Package: keymapper
Description-md5: bbe579d785b279437415488f97281034
Description-en: Keyboard map decision tree builder and interpreter
 This package implements an alternate way to let a user decide which
 keyboard map to use. It generates a decision tree and then asks the
 user to press a couple of keys. Depending on which keycode is returned,
 the list of possible keyboards is pruned until there is only one left.

Package: kinfocenter
Description-md5: 72a193c9dc89940db318996c6bccbc7a
Description-en: system information viewer
 The kinfocenter provides you with a centralized and convenient
 overview of your system and desktop environment.
 .
 The information center is made up of multiple modules.  Each module is a
 separate application, but the information center organizes all of these
 programs into a convenient location.

Package: ksystemstats
Description-md5: ba6f15379cbe24d7ba1e8180e559fa56
Description-en: plugin based system monitoring daemon
 KSystemStats is a daemon that collects statistics about the running system.

Package: kwin-addons
Description-md5: fac6e91933cc51eadb09490158f945f3
Description-en: additional desktop and window switchers for KWin
 This package contains additional KWin desktop and window switchers shipped in
 the Plasma 6 addons module.
 .
 This package is part of the KDE Plasma addons module.

Package: kwin-common
Description-md5: d812e38ecc0856bb858fffec17c3f257
Description-en: KDE window manager, common files
 KWin (pronounced as one syllable "kwin") is the window
 manager for the KDE Plasma Desktop. It gives you complete
 control over your windows, making sure they're not in the way
 but aid you in your task. It paints the window decoration,
 the bar on top of every window with (configurable) buttons
 like close, maximize and minimize. It also handles placing
 of windows and switching between them.
 .
 This package is part of the KDE base workspace module.

Package: kwin-data
Description-md5: 1d697d510504cce76cd18beb1fe47f23
Description-en: KDE window manager data files
 KWin (pronounced as one syllable "kwin") is the window
 manager for the KDE Plasma Desktop. It gives you complete
 control over your windows, making sure they're not in the way
 but aid you in your task. It paints the window decoration,
 the bar on top of every window with (configurable) buttons
 like close, maximize and minimize. It also handles placing
 of windows and switching between them.
 .
 This package contains the data files

Package: kwin-dev
Description-md5: e981f5e39df0aa1878605e91238fad93
Description-en: KDE window manager - devel files
 KWin (pronounced as one syllable "kwin") is the window
 manager for the KDE Plasma Desktop. It gives you complete
 control over your windows, making sure they're not in the way
 but aid you in your task. It paints the window decoration,
 the bar on top of every window with (configurable) buttons
 like close, maximize and minimize. It also handles placing
 of windows and switching between them.
 .
 This package is part of the KDE base workspace module.

Package: kwin-style-aurorae
Description-md5: 25d25ac879c54ec4dba83ecb56269d29
Description-en: KWin Aurorae decoration style engine
 Aurorae is a themeable window decoration for KWin.
 .
 This package contains the KWin decoration and settings modules.

Package: kwin-wayland
Description-md5: b83f16835b8ae0495f08abf775776e22
Description-en: KDE window manager, Wayland version
 KWin (pronounced as one syllable "kwin") is the window
 manager for the KDE Plasma Desktop. It gives you complete
 control over your windows, making sure they're not in the way
 but aid you in your task. It paints the window decoration,
 the bar on top of every window with (configurable) buttons
 like close, maximize and minimize. It also handles placing
 of windows and switching between them.
 .
 This package provides the wayland version, which is still a work in progress
 project, and is available as a PREVIEW release. Don't expect the same
 stability as with the x11 version.

Package: libamd-smi-dev
Description-md5: 1efc0aeda71ce549ea2140fcddee03b6
Description-en: AMD System Management Interface - headers
 amdsmi (AMD System Management Interface Library) is a C library for
 Linux providing user space interfaces to monitor and control AMD GPU devices.
 .
 This package provides the amdsmi headers.

Package: libamd-smi26
Description-md5: 8fcc26bb166c885fc4cf6eacbbdc0fb9
Description-en: AMD System Management Interface - library
 amdsmi (AMD System Management Interface Library) is a C library for
 Linux providing user space interfaces to monitor and control AMD GPU devices.
 .
 This package provides the amdsmi library.

Package: libbatterycontrol6
Description-md5: 412a9b0dd4d5ad26b2e80efd8d77e4c5
Description-en: Plasma Workspace battery control library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This package contains the battery control library files.

Package: libcoq-mathcomp-abel
Description-md5: 3adc2407c3df0e5de782fe2f159ef52b
Description-en: Abel-Galois and Abel-Ruffini theorems for Mathematical Components
 This package provides proofs of the Abel-Galois (solvability by
 radicals and solvability of the Galois group) and of the Abel-Ruffini
 theorem (general unsolvability of the quintic equations) using the
 Mathematical Components library.
 .
 The Mathematical Components library is a coherent repository of
 general-purpose formalized mathematical theories for the
 Coq proof assistant.

Package: libfdb5-0d
Description-md5: cd6e1ead650e153a0cb2fb1875cfc8eb
Description-en: Library for the ECMWF Fields Database
 FDB (Fields DataBase) is a domain-specific object store developed
 at ECMWF for storing, indexing and retrieving GRIB data.
 Each GRIB message is stored as a field and indexed trough semantic metadata
 (i.e. physical variables such as temperature, pressure, ...).
 A set of fields can be retrieved specifying a request using
 a specific language developed for accessing the MARS Archive.

Package: libfdb5-dev
Description-md5: d2ac0b8707fefe9576736d40e8f2de74
Description-en: Development files for the ECMWF Fields database
 FDB (Fields DataBase) is a domain-specific object store developed
 at ECMWF for storing, indexing and retrieving GRIB data.
 Each GRIB message is stored as a field and indexed trough semantic metadata
 (i.e. physical variables such as temperature, pressure, ...).
 A set of fields can be retrieved specifying a request using
 a specific language developed for accessing the MARS Archive.
 .
 This package provides shared libraries and headers.

Package: libgimp-3.0-0
Description-md5: 87c9f62281987fda19082f1b5cc2c95c
Description-en: Libraries for the GNU Image Manipulation Program
 This package includes the libgimp libraries, which are
 necessary to run GIMP and third-party GIMP plugins.

Package: libgimp-3.0-bin
Description-md5: 6c6840edf29ecfb6a58583f74a9931da
Description-en: Development binaries for the GIMP library
 This package contains binaries that are necessary to develop gimp
 plugins or packages that use libgimp.
 .
 Currently, it contains the gimptool-2.99 binary.

Package: libgimp-3.0-dev
Description-md5: 9dc8e4f80e3689624c2ada9283cd9ccd
Description-en: Headers and other files for compiling plugins for GIMP
 This package contains the header files for the GNU Image Manipulation
 Program, along with the static versions of libgimp.
 .
 Install this package if you wish to compile your own plugins,
 or if you wish to develop packages that use libgimp.

Package: libgimp-3.0-doc
Description-md5: 8acaa3767b69bc8f021740c983e4e23a
Description-en: Developers' Documentation for the GIMP library
 This package contains the HTML documentation for the GIMP library in
 /usr/share/gtk-doc/html/ .

Package: libgoamdsmi-shim64-1
Description-md5: ede845c87460929309bf7f423703e450
Description-en: AMD System Management Interface - go library
 goamdsmi_shim (AMD System Management Interface Library) is a C library for
 Linux providing user space interfaces to monitor and control AMD GPU devices.
 .
 This package provides the go library for amdsmi_shim.

Package: libgoamdsmi-shim64-dev
Description-md5: 5a89c212a9fa27063be2888e3adfd638
Description-en: AMD System Management Interface - go headers
 goamdsmi_shim (AMD System Management Interface Library) is a C library for
 Linux providing user space interfaces to monitor and control AMD GPU devices.
 .
 This package provides the go headers for amdsmi_shim.

Package: libhkl-dev
Description-md5: 0d7481b9aaeb30c4b8cca68ba9845573
Description-en: diffractometer computation control library - development files
 The hkl library is a framework for diffraction computation and
 diffractometer control, heavily used at the SOLEIL synchrotron. It
 supports various types of diffractometer geometry: Eulerian 4-circle,
 Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis
 geometry. For each of these it provides several numerically computed
 modes, such as bisector and constant psi.
 .
 This package provides everything needed to link against hkl.

Package: libhkl-doc
Description-md5: 959ca03ab47e3989c31ce0e866188eb5
Description-en: diffractometer computation control library - documentation
 The hkl library is a framework for diffraction computation and
 diffractometer control, heavily used at the SOLEIL synchrotron. It
 supports various types of diffractometer geometry: Eulerian 4-circle,
 Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis
 geometry. For each of these it provides several numerically computed
 modes, such as bisector and constant psi.
 .
 This package provides the documentation for hkl.

Package: libhkl5
Description-md5: 4484aae662bf3580c01ca9a8a9e15855
Description-en: diffractometer computation control library
 The hkl library is a framework for diffraction computation and
 diffractometer control, heavily used at the SOLEIL synchrotron. It
 supports various types of diffractometer geometry: Eulerian 4-circle,
 Eulerian 6-circle, kappa 4-circle, kappa 6-circle, and z-axis
 geometry. For each of these it provides several numerically computed
 modes, such as bisector and constant psi.
 .
 This package provides the runtime hkl library.

Package: libinput-tools
Description-md5: f642a39a00586a04a50f0a346b1355d4
Description-en: input device management and event handling library - command line tools
 libinput is a library that handles input devices for display servers and
 other applications that need to directly deal with input devices.
 .
 It provides device detection, device handling, input device event
 processing and abstraction to minimize the amount of custom input
 code the user of libinput needs to provide the common set of
 functionality that users expect.
 .
 This package includes the command line tools.

Package: libjavascriptcoregtk-bin
Description-md5: ac7afc0b1a4392958885f97c8f08146c
Description-en: JavaScript engine library from WebKitGTK - command-line interpreter
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This package provides jsc, a command-line JavaScript interpreter.

Package: libjuh-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: libjurt-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: libkfontinst6
Description-md5: 0dc28ea6b2cfe009830fa3d892f9e49f
Description-en: Plasma Workspace fonts installation library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This package contains the fonts installation library files.

Package: libkfontinstui6
Description-md5: 74b4397758fb41620094c4b138fb57dc
Description-en: Plasma Workspace UI components for fonts installation
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This library provides UI components to manage fonts installation
 used in the fonts installation KCM configuration screen.
 .
 This package contains the library files for the fonts installation
 UI components.

Package: libklipper6
Description-md5: 17093a81b8715340cb7a8a5bc08572cb
Description-en: Plasma Workspaces Klipper library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 Klipper is the Plasma clipboard utility. It stores clipboard
 history, and allows you to link clipboard contents to application
 actions.
 .
 This package contains the Klipper library files.

Package: libklookandfeel6
Description-md5: 5ec8279bfecf5d6d7ee81d4813a6ab1a
Description-en: Plasma Workspaces KLookAndFeel library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This package contains the KLookAndFeel library files.

Package: libkmpris6
Description-md5: cadc0aa3081d898b6da89e61d25e5d56
Description-en: Plasma Workspace MPRIS library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This library can be used to control Media Player Remote Interfacing
 Specification-compatible media players.
 .
 This package contains Plasma Workspace MPRIS library files.

Package: libkwin6
Description-md5: 02cae5c96f2a22c6b7bb14383d30abed
Description-en: KDE window manager library
 KWin (pronounced as one syllable "kwin") is the window
 manager for the KDE Plasma Desktop. It gives you complete
 control over your windows, making sure they're not in the way
 but aid you in your task. It paints the window decoration,
 the bar on top of every window with (configurable) buttons
 like close, maximize and minimize. It also handles placing
 of windows and switching between them.
 .
 This package is part of the KDE base workspace module.

Package: libkworkspace6-6
Description-md5: 81119c72b3935cc98452ac99b3441b80
Description-en: Plasma Workspace library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This library provides the core features of Plasma Workspace like
 display, login and session management.
 .
 This package contains the main Plasma Workspace library files.

Package: liblomiri-thumbnailer-qt-dev
Description-md5: d3cdc549ede6550f492d0b9cdd41894c
Description-en: Qt/C++ API to obtain thumbnails (development files)
 Lomiri Thumbnailer is an API for the Lomiri operating environment to
 create and cache image thumbnails for local and remote media.
 .
 Library providing a client API for obtaining thumbnails from the DBus
 service.
 .
 This package provides the development files for the library.

Package: liblomiri-thumbnailer-qt1.0
Description-md5: 118a884cdf727986556c0a172cff49da
Description-en: Qt/C++ API to obtain thumbnails
 Lomiri Thumbnailer is an API for the Lomiri operating environment to
 create and cache image thumbnails for local and remote media.
 .
 Library providing a client API for obtaining thumbnails from the DBus
 service.

Package: liblua5.5-0
Description-md5: 599a8c0ef26eca7f98d70a5c69b83734
Description-en: Shared library for the Lua interpreter version 5.5
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.

Package: liblua5.5-dev
Description-md5: 7627f3ddf0205eadebe62d9d3d92e91c
Description-en: Development files for the Lua language version 5.5
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains developer resources for using the Lua library.
 Install it if you are developing programs which use the Lua C API.
 .
 This package also contains the official manual covering the Lua language
 and C API.

Package: libmetkit-data
Description-md5: e17aed0c2e16f83f05902006ac4a1168
Description-en: Data used by the ECMWF Metkit Library
 MetKit is a toolkit from ECMWF for manipulating and describing
 meteorological objects, implementing the MARS language and associated
 processing and semantics.
 .
 This package contains data used by Metkit

Package: libmetkit-dev
Description-md5: b404f9e9f4b2eda46ac44f899fd39740
Description-en: Development files for the Metkit toolkit
 MetKit is a toolkit from ECMWF for manipulating and describing
 meteorological objects, implementing the MARS language and associated
 processing and semantics.
 .
 This package provides shared libraries and headers.

Package: libmetkit-utils
Description-md5: 18ec69375ccc709635f8cf67931673dc
Description-en: Utilities for the MetKit MARS access library
 MetKit is a toolkit from ECMWF for manipulating and describing
 meteorological objects, implementing the MARS language and associated
 processing and semantics.
 .
 This package contains the tool 'parse-mars-request'

Package: libmetkit0d
Description-md5: ffd1c836e3d87e69b2df136b1d6bd4dc
Description-en: Library for Meteorology tookit, implementing MARS language
 MetKit is a toolkit from ECMWF for manipulating and describing
 meteorological objects, implementing the MARS language and associated
 processing and semantics.
 MARS is the Meteorological Archive Retrieval System from ECMWF.

Package: libmetview-dev
Description-md5: aab56829c1a4f7ec880dc0283fb8b3eb
Description-en: Development files for MetView
 Metview has been designed as a flexible, modular and extendible system
 able to accommodate the evolving needs of the user.
 The system is based on the ECMWF standards for graphics (Magics) and
 data access (MARS) but can also access locally stored data.
 The user interface is based on Motif and Qt. Metview is a
 fully distributed system where modules can run on different workstations
 and servers.
 .
 This package provides static libraries and include files for building
 Metview-based software.

Package: libmetview0d
Description-md5: 538ea032789f4cb1b8c6534dbc24d0df
Description-en: Shared libraries  for MetView
 Metview has been designed as a flexible, modular and extendible system
 able to accommodate the evolving needs of the user.
 The system is based on the ECMWF standards for graphics (Magics) and
 data access (MARS) but can also access locally stored data.
 The user interface is based on Motif and Qt. Metview is a
 fully distributed system where modules can run on different workstations
 and servers.
 .
 This package provides shared libraries and  for  Metview-based software.

Package: libnotificationmanager1
Description-md5: 2a62fef8881e2f1eab4ca93f6e3a28cd
Description-en: Plasma Workspace notification manager library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This library is responsible for listing notifications, closing them
 and interacting with them in Plasma.
 .
 This package contains the notification manager library files.

Package: libnss-myhostname
Description-md5: 0980255dcdd179a9442647b0c4bdcb7c
Description-en: nss module providing fallback resolution for the current hostname
 This package contains a plugin for the Name Service Switch, providing host
 name resolution for the locally configured system hostname as returned by
 gethostname(2). It returns all locally configured public IP addresses or -- if
 none are configured, the IPv4 address 127.0.0.2 (which is on the local
 loopback) and the IPv6 address ::1 (which is the local host).
 .
 A lot of software relies on that the local host name is resolvable. This
 package provides an alternative to the fragile and error-prone manual editing
 of /etc/hosts.
 .
 Installing this package automatically adds myhostname to /etc/nsswitch.conf.

Package: libnss-resolve
Description-md5: 2dce7349d41cde95481f217d1250a7a1
Description-en: nss module to resolve names via systemd-resolved
 nss-resolve is a plugin for the GNU Name Service Switch (NSS) functionality
 of the GNU C Library (glibc) providing DNS and LLMNR resolution to programs via
 the systemd-resolved daemon (provided in the systemd-resolved package).
 .
 Installing this package automatically adds resolve to /etc/nsswitch.conf.

Package: libopenshot-audio-dev
Description-md5: 3fd7dc237b3e5ed2601c94a4040cf1bd
Description-en: development files for the OpenShot audio library
 The OpenShot audio library is a program which allows high-quality
 editing and playback of audio based on the JUCE library.
 .
 This package provides the development files.

Package: libopenshot-audio-doc
Description-md5: 16f42549fa26d965998b4a7457618efa
Description-en: documentation for the OpenShot audio library
 The OpenShot audio library is a program which allows high-quality
 editing and playback of audio based on the JUCE library.
 .
 This package provides the documentation.

Package: libopenshot-audio-test-sound
Description-md5: 325f0bc0697f11e338f50df8443334be
Description-en: plays test sound using libopenshot-audio
 The OpenShot audio library is a program which allows high-quality
 editing and playback of audio based on the JUCE library.
 .
 This package provides the test binary to test the sound using
 libopenshot-audio.

Package: libopenshot-audio10
Description-md5: ee5da53019df3890000816b7b9043907
Description-en: library for high-quality audio editing
 The OpenShot audio library is a program which allows high-quality
 editing and playback of audio based on the JUCE library.
 .
 This package provides the shared library.

Package: libpipewire-0.3-modules-extra
Description-md5: 850c30942e95114bc2463b8f98ef23a0
Description-en: libraries for the PipeWire multimedia server - extra modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains the ffado driver module.

Package: libpipewire-0.3-modules-x11
Description-md5: bc8ef3ab07b2505388b17ccf79d5a7ee
Description-en: libraries for the PipeWire multimedia server - X11 modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains X11 modules.

Package: libplasma-dev
Description-md5: 9e8a6c758ca761afb9c0b2c7b99501fa
Description-en: development files for libplasma
 Plasma library and runtime components based upon KF6 and Qt 6.
 .
 Contains development files for libplasma.

Package: libplasma-doc
Description-md5: 0fb4dfc7b86e2cbee79397ad1e5493da
Description-en: Plasma Runtime components (documentation)
 Plasma library and runtime components based upon KF6 and Qt 6.
 .
 This package contains the qch documentation files.

Package: libplasma7
Description-md5: a15d5f4558d300bd70c5c317ba2f78ee
Description-en: Plasma Runtime components
 Plasma library and runtime components based upon KF6 and Qt 6.

Package: libplasmaquick7
Description-md5: a15d5f4558d300bd70c5c317ba2f78ee
Description-en: Plasma Runtime components
 Plasma library and runtime components based upon KF6 and Qt 6.

Package: libplasmaweatherdata6
Description-md5: 773eb186203b33b48a2dcad767d63656
Description-en: weather data manipulation library for Plasma widgets
 This library provide various classes to manipulate weather forecast data.
 .
 This package is part of the KDE Plasma 6 addons module.

Package: libplasmaweatherion6
Description-md5: da5afd4493b3cae761db5460b4755a90
Description-en: weather location and forcast library for Plasma widgets
 This library provides weather "ions" that can be used to request locations
 and weather forecast on the locations.
 .
 This package is part of the KDE Plasma 6 addons module.

Package: libpowerdevilcore2
Description-md5: 91e467ba5874234e56188073f9bbfb96
Description-en: shared library for the KDE power management features in Plasma
 PowerDevil is the internal name of the KDE power management service
 for Plasma. It is responsible for some (but not all) interactions
 with hardware functionality.
 .
 This package contains the shared library providing the core features
 of PowerDevil.

Package: libreoffice
Description-md5: 088230de5697749b53ffeec818013832
Description-en: office productivity suite (metapackage)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This metapackage installs all components of libreoffice:
 * libreoffice-writer: Word processor
 * libreoffice-calc: Spreadsheet
 * libreoffice-impress: Presentation
 * libreoffice-draw: Drawing
 * libreoffice-base: Database
 * libreoffice-math: Equation editor
 It also recommends additional packages (e.g. fonts) in order to match an
 upstream LibreOffice install as closely as possible.
 .
 You can extend the functionality of LibreOffice by installing these
 packages:
 * hunspell-*/myspell-*: Hunspell/Myspell dictionaries
 for use with LibreOffice
 * libreoffice-l10n-*: UI interface translation
 * libreoffice-help-*: User help
 * mythes-*: Thesauri for the use with LibreOffice
 * hyphen-*: Hyphenation patterns for LibreOffice
 * libreoffice-gtk3: Gtk UI Plugin, GNOME File Picker support
 * libreoffice-gnome: GIO backend
 * unixodbc: ODBC database support
 * cups-bsd: Allows LibreOffice to detect your CUPS printer queues
 automatically
 * libsane: Use your sane-supported scanner with LibreOffice
 * libxrender1: Speed up display by using Xrender library
 * libgl1: OpenGL support
 * openclipart-libreoffice: Open Clip Art Gallery with LibreOffice index
 files
 * firefox-esr | thunderbird | firefox:
 Mozilla profile with Certificates needed for XML Security...
 * openjdk-11-jre | openjdk-8-jre | java8-runtime:
 Java Runtime Environment for use with LibreOffice
 * pstoedit / imagemagick / ghostscript: helper tools for EPS
 * gstreamer0.10-plugins-*: GStreamer plugins for use with LibreOffices
 media backend
 * libpaper-utils: papersize detection support via paperconf
 * bluez: Bluetooth support for Impress (slideshow remote control)
 * afdko-bin: Handling of embedded fonts during import/export/...

Package: libreoffice-base
Description-md5: 5529fff5c628ca6b70284749063daea4
Description-en: office productivity suite -- database
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database component for LibreOffice.

Package: libreoffice-base-drivers
Description-md5: 053150c78db425da1e4c18f95eac8e8a
Description-en: Database connectivity drivers for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database connectivity drivers used by LibreOffices
 database functionality:
 - ODBC
 - JDBC
 - dBase
 - Calc
 - Flat files
 .
 You can extend this by installing:
 .
 * unixodbc: ODBC database support
 * libmyodbc | odbc-postgresql | libsqliteodbc | tdsodbc | odbc-mdbtools: ODBC
 drivers for:
 - MySQL
 - PostgreSQL
 - SQLite
 - MS SQL / Sybase SQL
 - *.mdb (JET / MS Access)
 * libmariadb-java | libpg-java | libjtds-java: JDBC Drivers
 for:
 - MySQL/MariaDB
 - PostgreSQL
 - MS SQL Server and Sybase
 * libreoffice-sdbc-hsqldb: embedded HSQLDB SDBC Driver
 * libreoffice-sdbc-firebird: (embedded) Firebird SDBC Driver
 * libreoffice-sdbc-postgresql: PostgreSQL SDBC Driver
 * libreoffice-sdbc-mysql: MySQL/MariaDB SDBC Driver

Package: libreoffice-base-nogui
Description-md5: e83dd6cdb7c67ccb13c0407fd6a32ebc
Description-en: office productivity suite -- database (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database component for LibreOffice.

Package: libreoffice-calc-nogui
Description-md5: ed9483b973f6b2dd25d568b6ef77d8c4
Description-en: office productivity suite -- spreadsheet (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the spreadsheet component for LibreOffice
 for use with libreoffice-core-nogui.

Package: libreoffice-core-nogui
Description-md5: d16e9871c20b5b5c8f38d6d74c8dfe8e
Description-en: office productivity suite -- arch-dependent files (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the architecture-dependent core files of
 LibreOffice without GUI support for server-based or commandline usage of
 LibreOffice.

Package: libreoffice-dev-gui
Description-md5: c7381cdfc5446c44dd4085615626c61e
Description-en: office productivity suite -- "GUI" development stuff
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the gengal utility which was moved from
 libreoffice-dev.

Package: libreoffice-draw-nogui
Description-md5: c4d7d9707b31ef9344d70e006f7a27af
Description-en: office productivity suite -- drawing (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the drawing component for LibreOffice.

Package: libreoffice-evolution
Description-md5: 7d9a6b62e74d5a806f263ecd0d4bed18
Description-en: office productivity suite -- Evolution addressbook support
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package allows LibreOffice to access Evolution address books.
 You need to install evolution separately.

Package: libreoffice-gtk4
Description-md5: 286c3520f994b01929165fe0f5270c87
Description-en: office productivity suite -- GTK 4 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the GTK plugin for drawing LibreOffices widgets
 with GTK 4 and GTK/GNOMEish print dialog.
 .
 You need to enable it manually by export SAL_USE_VCLPLUGIN=gtk4.

Package: libreoffice-impress-nogui
Description-md5: 10ce2c27d434135cd9308937c1bdb31c
Description-en: office productivity suite -- presentation (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the presentation component for LibreOffice.

Package: libreoffice-kf6
Description-md5: f949c58052050af92a4bb22203028d42
Description-en: office productivity suite -- KDE Frameworks 6 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the KF6 plugin for LibreOffice and a KF6-based File
 Picker when running under Plasma.

Package: libreoffice-librelogo
Description-md5: 023ad301975a76b3e2e8cd81201bf306
Description-en: Logo-like programming language for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains Librelogo, which is a pyuno-based Logo-like programming
 language with interactive vectorgraphics for education and DTP
 - basic Logo syntax for back compatibility with educational Logo systems
 - interactive vectorgraphics in LibreOffice Writer
 - native commands (easily translatable)
 - Python data structures (list, tuple, set, dictionary) and other Python
 features

Package: libreoffice-math-nogui
Description-md5: e104f51d572d2ee302d3c3550e97e6ff
Description-en: office productivity suite -- equation editor (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the equation editor component for LibreOffice.

Package: libreoffice-nogui
Description-md5: 5effc8f5f85387f383a3075664ced764
Description-en: office productivity suite (metapackage, no GUI)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This metapackage installs all components of libreoffice:
 * libreoffice-writer: Word processor
 * libreoffice-calc: Spreadsheet
 * libreoffice-impress: Presentation
 * libreoffice-draw: Drawing
 * libreoffice-base: Database
 * libreoffice-math: Equation editor
 .
 WITHOUT GUI SUPPORT.
 .
 This package is intended mostly for scripting needs.

Package: libreoffice-plasma
Description-md5: 36a51d062e37f6d96526d1414adef018
Description-en: office productivity suite -- some Plasma integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some minor Plasma integration (like AppData
 and "Create New..." integration) .

Package: libreoffice-qt6
Description-md5: a45aee748dd8cc60d61451e1f7253f31
Description-en: office productivity suite -- Qt 6 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the Qt 6 plugin for drawing LibreOffices widgets
 with Qt 6 and a Qt File Picker and print dialog.
 .
 You need to enable it manually by export SAL_USE_VCLPLUGIN=qt6.

Package: libreoffice-report-builder
Description-md5: e3c9562277895483024c6ff8e6d1dfdf
Description-en: LibreOffice component for building database reports
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the report builder:
 "Create with the Sun Report Builder stylish, smart-looking database reports.
 The flexible report editor can define group and page headers as well as
 group and page footers and even calculation fields are available to
 accomplish complex database reports."

Package: libreoffice-report-builder-bin
Description-md5: 4de9416ad29a7951be39b95f83055e84
Description-en: LibreOffice component for building database reports -- libraries
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some architecture-dependent support libraries
 (librpt*.so) for the report builder component.

Package: libreoffice-report-builder-bin-nogui
Description-md5: 6d5263ac65fb4d1c4c7caf8eb713944d
Description-en: LibreOffice component for building database reports -- libraries (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some architecture-dependent support libraries
 (librpt*.so) for the report builder component.

Package: libreoffice-rust-uno-example
Description-md5: 776156cb67bfc7419eb92bafc349ad39
Description-en: Example extension for LibreOffices Rust-UNO binding
 This package contains a example extension testing the Libreoffice
 Rust-UNO binding.
 .
 You normally don't need it unless you want to look at it since it doesn't
 contain anything useful except a test; but it  is used for testing in
 autopkgtest

Package: libreoffice-script-provider-bsh
Description-md5: 720bef09745ce9eb4902772fb5c437d8
Description-en: BeanShell script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support BeanShell.

Package: libreoffice-script-provider-js
Description-md5: 41b18315e9be2aaa24a28415b907118e
Description-en: JavaScript script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support JavaScript.

Package: libreoffice-script-provider-python
Description-md5: 019117f2dc708fc6c1179714b81e2076
Description-en: Python script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support Python.

Package: libreoffice-sdbc-firebird
Description-md5: 17d206d15f4a6fbda10fa8da477a3e8c
Description-en: (embedded) Firebird SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Firebird SDBC Driver allows one to use the Firebird (embedded) database
 from LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-hsqldb
Description-md5: 6f134726a575672413c47417341a5e32
Description-en: embedded HSQLDB SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The HSQLDB SDBC Driver allows one to use the HSQLDB embedded database from
 LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-mysql
Description-md5: 1022a8fb85f50d65847256d96ae25e4f
Description-en: MariaDB/MySQL SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The MariaDB/MySQL driver allows one to use the MariaDB or MySQL
 database from LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-postgresql
Description-md5: 06f71158aa78dbe7201679601bd1279b
Description-en: PostgreSQL SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The PostgreSQL SDBC Driver allows one to use the PostgreSQL database from
 LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-smoketest-data
Description-md5: 7540f40cccbf63cb8381dca8979a0828
Description-en: data files for LibreOffices "smoketest"
 Data files for the LibreOffice "smoketest".

Package: libreoffice-style-breeze
Description-md5: b3a725e09462ccaec72c3b8bb964827b
Description-en: office productivity suite -- Breeze symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "breeze" symbol style, default style for KDE 5.

Package: libreoffice-style-karasa-jaga
Description-md5: 62dc98488a5247cbad91f4e0ec562bcf
Description-en: office productivity suite -- Karasa Jaga symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "karasa_jaga" symbol style.

Package: libreoffice-style-sifr
Description-md5: 0fd5516a8dab8f6841c284edea8786d7
Description-en: office productivity suite -- Sifr symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "sifr" symbol style (an adaption of the Gnome
 symbolic theme), needs to be manually  enabled in the LibreOffice option
 menu.

Package: libreoffice-style-sukapura
Description-md5: b9dbd94d0660dbc8a05ba918cb3fb897
Description-en: office productivity suite -- Sukapura symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "sukapura" symbol style.

Package: libreoffice-style-tango
Description-md5: aaf8968f6a7dfef93cd3c0082bbe8dbd
Description-en: transitional package for Tango symbol style
 You can safely remove this package.

Package: libreoffice-subsequentcheckbase
Description-md5: cda482c5487d616e1ae7a228fce1d955
Description-en: LibreOffice java test libraries
 Java libraries LibreOffice subsequentchecks integration test suite

Package: libreoffice-uiconfig-base
Description-md5: e6ac75c394251a0c3842ae13e3f9c033
Description-en: UI data ("config") for LibreOffice Base
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains internal "configuration" of various UI components.
 It is not meant to be editable. It is just split out for dependencies of
 other packages.
 .
 You will usually not need to install this package manually but it should
 just be pulled in by other packages.

Package: libreoffice-uiconfig-report-builder
Description-md5: c254f403f0fe84819d9f6437b3755876
Description-en: UI data ("config") for the LibreOffice Report Builder
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains internal "configuration" of various UI components.
 It is not meant to be editable. It is just split out for dependencies of
 other packages.
 .
 You will usually not need to install this package manually but it should
 just be pulled in by other packages.

Package: libreoffice-wiki-publisher
Description-md5: a66aaa282ae4941588a4d314d1ebbf79
Description-en: LibreOffice extension for working with MediaWiki articles
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains an extension to create/edit/publish MediaWiki
 articles with LibreOffice

Package: libreoffice-writer-nogui
Description-md5: 963dc225bb14f9e5974345a7995f16a7
Description-en: office productivity suite -- word processor (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the wordprocessor component for LibreOffice.

Package: libreofficekit-dev-gtk
Description-md5: f21a52a8131048a3b01cbcb1b56afa07
Description-en: LibreOfficeKit -- Gtk header and introspection development
 LibreOfficeKit can be used for accessing LibreOffice functionality through
 C/C++, without any need to use UNO.
 .
 This package contains the header needed for using LibreOfficeKit with Gtk
 and for developing stuff using introspection.

Package: libridl-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: librust-virtiofsd-dev
Description-md5: e190504f545651689e82a9703932c825
Description-en: Virtio-fs vhost-user device daemon - Rust source code
 Source code for Debianized Rust crate "virtiofsd"

Package: libspa-0.2-jack
Description-md5: fcaebf5c28cc8f2b8e8f649522f2fa89
Description-en: libraries for the PipeWire multimedia server - JACK client
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains a plugin to make PipeWire able to connect to a
 JACK server, which will be used for audio playback and recording.

Package: libspa-0.2-modules-extra
Description-md5: d5cf43e6dcd4761717d090c49c24f6fc
Description-en: libraries for the PipeWire multimedia server Simple Plugin API - extra modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains the ebur128, lv2, onnx and sofa filter-chain modules
 and the bluetooth aac codec.

Package: libsss-sudo
Description-md5: 43cb83a7573af74214858e973f744090
Description-en: Communicator library for sudo
 Utility library to allow communication between sudo and SSSD for caching
 sudo rules by SSSD.

Package: libtaskmanager6
Description-md5: 515dc6cce94310da7111d5fd14b8ae61
Description-en: Plasma Workspace task manager library
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 The task manager library provides various abstractions for listing
 windows, startup tasks and launcher jobs.
 .
 This package contains the task manager library files.

Package: libunoil-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: linux-buildinfo-7.0.0-1003-vmware
Description-md5: 0222e553748a3d594e0b1f3ef6a02ad4
Description-en: Linux kernel buildinfo for version 7.0.0
 This package contains the Linux kernel buildinfo for version 7.0.0.
 .
 You likely do not want to install this package.

Package: linux-cloud-tools-7.0.0-1003-vmware
Description-md5: 7f399b8786fa423e358ca80858559ca6
Description-en: Linux kernel version specific cloud tools for version 7.0.0-1003
 This package provides the architecture dependant parts for kernel
 version locked tools for cloud for version 7.0.0-1003.

Package: linux-cloud-tools-vmware
Description-md5: 9d79f758e299a7c581a100c4c1798717
Description-en: VMWare Linux kernel cloud tools
 This package will always depend on the latest VMWare kernel cloud tools
 available.

Package: linux-cloud-tools-vmware-7.0
Description-md5: 9d79f758e299a7c581a100c4c1798717
Description-en: VMWare Linux kernel cloud tools
 This package will always depend on the latest VMWare kernel cloud tools
 available.

Package: linux-headers-7.0.0-1003-vmware
Description-md5: 802b67a2b892a440449f44b28f52b3b8
Description-en: Linux kernel headers for version 7.0.0
 This package provides kernel header files for version 7.0.0.
 .
 This is for sites that want the latest kernel headers.  Please read
 /usr/share/doc/linux-headers-7.0.0-1003/debian.README.gz for details.

Package: linux-headers-vmware
Description-md5: d3040f7149782e329b8c0dfa204efa69
Description-en: VMWare Linux kernel headers
 This package will always depend on the latest VMWare Linux kernel headers
 available.

Package: linux-headers-vmware-7.0
Description-md5: d3040f7149782e329b8c0dfa204efa69
Description-en: VMWare Linux kernel headers
 This package will always depend on the latest VMWare Linux kernel headers
 available.

Package: linux-image-7.0.0-1003-vmware
Description-md5: 1a1542040494e64d2b82930c8add3d70
Description-en: Signed kernel image vmware
 A kernel image for vmware.  This version of it is signed with
 Canonical's signing key.

Package: linux-image-unsigned-7.0.0-1003-vmware
Description-md5: 42efe85f5e447523bf872556255bb626
Description-en: Linux kernel image for version 7.0.0
 This package contains the unsigned Linux kernel image for version 7.0.0.
 .
 Supports VMWare vSphere processors.
 .
 Optimized for VMWare vSphere with vGPU support.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-vmware meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-image-vmware
Description-md5: 5dce7d677495f03900e4c545593d42dc
Description-en: VMWare Linux kernel image
 This package will always depend on the latest VMWare Linux kernel image
 available.

Package: linux-image-vmware-7.0
Description-md5: 5dce7d677495f03900e4c545593d42dc
Description-en: VMWare Linux kernel image
 This package will always depend on the latest VMWare Linux kernel image
 available.

Package: linux-main-modules-doca-ofed-26.01-7.0.0-1003-vmware
Description-md5: 199b3a25fb2da0b002b23b644b4d6fbe
Description-en: Signed doca-ofed-26.01 module for 7.0.0-1003
 This package contains the signed doca-ofed-26.01 modules.
 .
 You likely do not want to install this package directly, Instead, install
 the linux-doca-ofed-26.01-vmware meta-package, which will ensure that
 upgrades work correctly, and that supporting packages are also installed.

Package: linux-main-modules-doca-ofed-26.01-unsigned-7.0.0-1003-vmware
Description-md5: 2faa648dbe191e6ef776cbdc78a6a96e
Description-en: Unsigned doca-ofed-26.01 module for 7.0.0-1003
 This package contains the signed doca-ofed-26.01 modules.
 .
 You likely do not want to install this package directly, Instead, install
 the linux-doca-ofed-26.01-vmware meta-package, which will ensure that
 upgrades work correctly, and that supporting packages are also installed.

Package: linux-main-modules-vmware
Description-md5: 332dcc96ab5f2cb19129778bac2042c3
Description-en: Build interlock package. You do not want to install this package.

Package: linux-main-modules-zfs-7.0.0-1003-vmware
Description-md5: 1d47e6089c89f39ec330d1a80eabfde7
Description-en: Signed zfs module for 7.0.0-1003
 This package contains the signed zfs modules.
 .
 You likely do not want to install this package directly, Instead, install
 the linux-zfs-vmware meta-package, which will ensure that
 upgrades work correctly, and that supporting packages are also installed.

Package: linux-main-modules-zfs-unsigned-7.0.0-1003-vmware
Description-md5: 7425968354f6ba55374b5d140eb0a02d
Description-en: Unsigned zfs module for 7.0.0-1003
 This package contains the signed zfs modules.
 .
 You likely do not want to install this package directly, Instead, install
 the linux-zfs-vmware meta-package, which will ensure that
 upgrades work correctly, and that supporting packages are also installed.

Package: linux-main-signed-vmware
Description-md5: 332dcc96ab5f2cb19129778bac2042c3
Description-en: Build interlock package. You do not want to install this package.

Package: linux-modules-7.0.0-1003-vmware
Description-md5: 25c748957f5007633c6b6cad13888722
Description-en: Linux kernel modules for version 7.0.0
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports VMWare vSphere processors.
 .
 Optimized for VMWare vSphere with vGPU support.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-vmware meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-doca-ofed-26.01-unsigned-vmware
Description-md5: acc00f335967d190640e04a0c9dfe40d
Description-en: Extra drivers for doca-ofed-26.01 for the vmware flavour
 Install extra signed doca-ofed-26.01 modules compatible with the vmware flavour

Package: linux-modules-doca-ofed-26.01-vmware
Description-md5: acc00f335967d190640e04a0c9dfe40d
Description-en: Extra drivers for doca-ofed-26.01 for the vmware flavour
 Install extra signed doca-ofed-26.01 modules compatible with the vmware flavour

Package: linux-modules-nvidia-525-server-open-vmware
Description-md5: ba891011ec4a24cd113d8d2ff60e398f
Description-en: Extra drivers for nvidia-525-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -525-server-open to -580-server-open.

Package: linux-modules-nvidia-525-server-open-vmware-7.0
Description-md5: ba891011ec4a24cd113d8d2ff60e398f
Description-en: Extra drivers for nvidia-525-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -525-server-open to -580-server-open.

Package: linux-modules-nvidia-525-server-vmware
Description-md5: d1fcddc7b15c64828e6599ab7763d8d2
Description-en: Extra drivers for nvidia-525-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -525-server to -580-server.

Package: linux-modules-nvidia-525-server-vmware-7.0
Description-md5: d1fcddc7b15c64828e6599ab7763d8d2
Description-en: Extra drivers for nvidia-525-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -525-server to -580-server.

Package: linux-modules-nvidia-535-open-vmware
Description-md5: ca5fd9cd673b5c95e225e05352b91b76
Description-en: Extra drivers for nvidia-535-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-open to -580-open.

Package: linux-modules-nvidia-535-open-vmware-7.0
Description-md5: ca5fd9cd673b5c95e225e05352b91b76
Description-en: Extra drivers for nvidia-535-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-open to -580-open.

Package: linux-modules-nvidia-535-server-open-vmware
Description-md5: 440b39de51b9df6145ddc2d0d2d1fede
Description-en: Extra drivers for nvidia-535-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-server-open to -580-server-open.

Package: linux-modules-nvidia-535-server-open-vmware-7.0
Description-md5: 440b39de51b9df6145ddc2d0d2d1fede
Description-en: Extra drivers for nvidia-535-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-server-open to -580-server-open.

Package: linux-modules-nvidia-535-server-vmware
Description-md5: 40a1097be24c7aefaf3eef49f97d0e2b
Description-en: Extra drivers for nvidia-535-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-server to -580-server.

Package: linux-modules-nvidia-535-server-vmware-7.0
Description-md5: 40a1097be24c7aefaf3eef49f97d0e2b
Description-en: Extra drivers for nvidia-535-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535-server to -580-server.

Package: linux-modules-nvidia-535-vmware
Description-md5: 699a4e9e07c25a994fe30a7feb9b9126
Description-en: Extra drivers for nvidia-535 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535 to -580.

Package: linux-modules-nvidia-535-vmware-7.0
Description-md5: 699a4e9e07c25a994fe30a7feb9b9126
Description-en: Extra drivers for nvidia-535 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -535 to -580.

Package: linux-modules-nvidia-550-open-vmware
Description-md5: 144b94b806f5bef5db3af47ab63ef4ab
Description-en: Extra drivers for nvidia-550-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-open to -580-open.

Package: linux-modules-nvidia-550-open-vmware-7.0
Description-md5: 144b94b806f5bef5db3af47ab63ef4ab
Description-en: Extra drivers for nvidia-550-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-open to -580-open.

Package: linux-modules-nvidia-550-server-open-vmware
Description-md5: ac60199d4dfe4f71d4272382dba493b5
Description-en: Extra drivers for nvidia-550-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-server-open to -580-server-open.

Package: linux-modules-nvidia-550-server-open-vmware-7.0
Description-md5: ac60199d4dfe4f71d4272382dba493b5
Description-en: Extra drivers for nvidia-550-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-server-open to -580-server-open.

Package: linux-modules-nvidia-550-server-vmware
Description-md5: 40605e938f280f55513a266328e69c98
Description-en: Extra drivers for nvidia-550-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-server to -580-server.

Package: linux-modules-nvidia-550-server-vmware-7.0
Description-md5: 40605e938f280f55513a266328e69c98
Description-en: Extra drivers for nvidia-550-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550-server to -580-server.

Package: linux-modules-nvidia-550-vmware
Description-md5: 3a4c36f6f1e01c8d9a440a025b789c04
Description-en: Extra drivers for nvidia-550 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550 to -580.

Package: linux-modules-nvidia-550-vmware-7.0
Description-md5: 3a4c36f6f1e01c8d9a440a025b789c04
Description-en: Extra drivers for nvidia-550 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -550 to -580.

Package: linux-modules-nvidia-560-open-vmware
Description-md5: 6901db7d54374e54e05e51f7e31a7ba0
Description-en: Extra drivers for nvidia-560-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -560-open to -580-open.

Package: linux-modules-nvidia-560-open-vmware-7.0
Description-md5: 6901db7d54374e54e05e51f7e31a7ba0
Description-en: Extra drivers for nvidia-560-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -560-open to -580-open.

Package: linux-modules-nvidia-560-vmware
Description-md5: a3602f0bd19492af5fff5145c282dccf
Description-en: Extra drivers for nvidia-560 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -560 to -580.

Package: linux-modules-nvidia-560-vmware-7.0
Description-md5: a3602f0bd19492af5fff5145c282dccf
Description-en: Extra drivers for nvidia-560 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -560 to -580.

Package: linux-modules-nvidia-565-server-open-vmware
Description-md5: fc281cfa81a1eea7cf403b837c2f031c
Description-en: Extra drivers for nvidia-565-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -565-server-open to -580-server-open.

Package: linux-modules-nvidia-565-server-open-vmware-7.0
Description-md5: fc281cfa81a1eea7cf403b837c2f031c
Description-en: Extra drivers for nvidia-565-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -565-server-open to -580-server-open.

Package: linux-modules-nvidia-565-server-vmware
Description-md5: 1870c5c0ce4bbd2b9c433acb1f9e5d71
Description-en: Extra drivers for nvidia-565-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -565-server to -580-server.

Package: linux-modules-nvidia-565-server-vmware-7.0
Description-md5: 1870c5c0ce4bbd2b9c433acb1f9e5d71
Description-en: Extra drivers for nvidia-565-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -565-server to -580-server.

Package: linux-modules-nvidia-570-open-vmware
Description-md5: 6908ac77f215ecd1cb7d723552b0e101
Description-en: Extra drivers for nvidia-570-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-open to -580-open.

Package: linux-modules-nvidia-570-open-vmware-7.0
Description-md5: 6908ac77f215ecd1cb7d723552b0e101
Description-en: Extra drivers for nvidia-570-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-open to -580-open.

Package: linux-modules-nvidia-570-server-open-vmware
Description-md5: 532869dc0a4f0d9326e4927238dcdb87
Description-en: Extra drivers for nvidia-570-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-server-open to -580-server-open.

Package: linux-modules-nvidia-570-server-open-vmware-7.0
Description-md5: 532869dc0a4f0d9326e4927238dcdb87
Description-en: Extra drivers for nvidia-570-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-server-open to -580-server-open.

Package: linux-modules-nvidia-570-server-vmware
Description-md5: d8de28659fb54a22673847f375a4a94e
Description-en: Extra drivers for nvidia-570-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-server to -580-server.

Package: linux-modules-nvidia-570-server-vmware-7.0
Description-md5: d8de28659fb54a22673847f375a4a94e
Description-en: Extra drivers for nvidia-570-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570-server to -580-server.

Package: linux-modules-nvidia-570-vmware
Description-md5: 14e7ff58cc87964007fc41e5e870b3d0
Description-en: Extra drivers for nvidia-570 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570 to -580.

Package: linux-modules-nvidia-570-vmware-7.0
Description-md5: 14e7ff58cc87964007fc41e5e870b3d0
Description-en: Extra drivers for nvidia-570 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -570 to -580.

Package: linux-modules-nvidia-580-7.0.0-1003-vmware
Description-md5: 8895b391e298af568aa54308c9564fac
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-580-open-7.0.0-1003-vmware
Description-md5: cee39831c7bb31b4df0b514c8907faf4
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-580-open-vmware
Description-md5: f851dbb6627ea689260721854bed14a4
Description-en: Extra drivers for nvidia-580-open for the vmware flavour
 Install extra signed nvidia-580-open modules compatible with the vmware flavour.

Package: linux-modules-nvidia-580-open-vmware-7.0
Description-md5: 1db622c47cf1849ff7f1ad30ef286390
Description-en: Extra drivers for nvidia-580-open for the vmware-7.0 flavour
 Install extra signed nvidia-580-open modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-580-server-7.0.0-1003-vmware
Description-md5: cb875076c8d5c168249beb630f7bf5ad
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-server-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-580-server-open-7.0.0-1003-vmware
Description-md5: 8c522fded1b0ef3ca8ae3d73aa6cd029
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-server-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-580-server-open-vmware
Description-md5: 3c5eecb0a25a980334292ffddca5d100
Description-en: Extra drivers for nvidia-580-server-open for the vmware flavour
 Install extra signed nvidia-580-server-open modules compatible with the vmware flavour.

Package: linux-modules-nvidia-580-server-open-vmware-7.0
Description-md5: ef86611364e6c721625e77850e4126d1
Description-en: Extra drivers for nvidia-580-server-open for the vmware-7.0 flavour
 Install extra signed nvidia-580-server-open modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-580-server-vmware
Description-md5: 55fac7686fd8ebff9ea7503d51e11edf
Description-en: Extra drivers for nvidia-580-server for the vmware flavour
 Install extra signed nvidia-580-server modules compatible with the vmware flavour.

Package: linux-modules-nvidia-580-server-vmware-7.0
Description-md5: 55f974f2c4ff5e4cbe2d4ee7f992fee1
Description-en: Extra drivers for nvidia-580-server for the vmware-7.0 flavour
 Install extra signed nvidia-580-server modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-580-vmware
Description-md5: cf6ce8dbece7fc441d6b05702d594699
Description-en: Extra drivers for nvidia-580 for the vmware flavour
 Install extra signed nvidia-580 modules compatible with the vmware flavour.

Package: linux-modules-nvidia-580-vmware-7.0
Description-md5: 46ddafd5552d2c5b483be840c688872f
Description-en: Extra drivers for nvidia-580 for the vmware-7.0 flavour
 Install extra signed nvidia-580 modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-590-open-vmware
Description-md5: ab59a8359d4ed174352be067a93466ed
Description-en: Extra drivers for nvidia-590-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-open to -595-open.

Package: linux-modules-nvidia-590-open-vmware-7.0
Description-md5: ab59a8359d4ed174352be067a93466ed
Description-en: Extra drivers for nvidia-590-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-open to -595-open.

Package: linux-modules-nvidia-590-server-open-vmware
Description-md5: 298f42a84e2775214875448ef949014b
Description-en: Extra drivers for nvidia-590-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-server-open to -595-server-open.

Package: linux-modules-nvidia-590-server-open-vmware-7.0
Description-md5: 298f42a84e2775214875448ef949014b
Description-en: Extra drivers for nvidia-590-server-open for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-server-open to -595-server-open.

Package: linux-modules-nvidia-590-server-vmware
Description-md5: 301aea31f883b98fd42b90a1f98adeab
Description-en: Extra drivers for nvidia-590-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-server to -595-server.

Package: linux-modules-nvidia-590-server-vmware-7.0
Description-md5: 301aea31f883b98fd42b90a1f98adeab
Description-en: Extra drivers for nvidia-590-server for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590-server to -595-server.

Package: linux-modules-nvidia-590-vmware
Description-md5: 6b6cc248a715bd2e6a1beca8285835c1
Description-en: Extra drivers for nvidia-590 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590 to -595.

Package: linux-modules-nvidia-590-vmware-7.0
Description-md5: 6b6cc248a715bd2e6a1beca8285835c1
Description-en: Extra drivers for nvidia-590 for the vmware flavour (dummy transitional package)
 Transitional package for upgrades of -590 to -595.

Package: linux-modules-nvidia-595-7.0.0-1003-vmware
Description-md5: bf2427e0b02bc5c7526e4f4837c51ee9
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-595-open-7.0.0-1003-vmware
Description-md5: 49f7338842f58f172614a236e8572e60
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-595-open-vmware
Description-md5: 6df22bdb55288b5b5f0d10a5aba59b3d
Description-en: Extra drivers for nvidia-595-open for the vmware flavour
 Install extra signed nvidia-595-open modules compatible with the vmware flavour.

Package: linux-modules-nvidia-595-open-vmware-7.0
Description-md5: 7863e756d941cc6764d0e3e086f06579
Description-en: Extra drivers for nvidia-595-open for the vmware-7.0 flavour
 Install extra signed nvidia-595-open modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-595-server-7.0.0-1003-vmware
Description-md5: 9e1be9a527fccf35c7615f758c73879b
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-server-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-595-server-open-7.0.0-1003-vmware
Description-md5: 77591b3ff6013779edc2bd1b899f1aed
Description-en: Linux kernel nvidia modules for version 7.0.0-1003
 This package pulls together the Linux kernel nvidia modules for
 version 7.0.0-1003 with the appropriate signatures.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-server-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-modules-nvidia-595-server-open-vmware
Description-md5: e26a4abbc33e61c3c155e1582ee6e104
Description-en: Extra drivers for nvidia-595-server-open for the vmware flavour
 Install extra signed nvidia-595-server-open modules compatible with the vmware flavour.

Package: linux-modules-nvidia-595-server-open-vmware-7.0
Description-md5: 5b9550f883e76a7d882e7be263920a0e
Description-en: Extra drivers for nvidia-595-server-open for the vmware-7.0 flavour
 Install extra signed nvidia-595-server-open modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-595-server-vmware
Description-md5: 1e4a8dc65da70c2c26cf0e899bb41836
Description-en: Extra drivers for nvidia-595-server for the vmware flavour
 Install extra signed nvidia-595-server modules compatible with the vmware flavour.

Package: linux-modules-nvidia-595-server-vmware-7.0
Description-md5: 761987dea4568f9ba5861fd719120a1b
Description-en: Extra drivers for nvidia-595-server for the vmware-7.0 flavour
 Install extra signed nvidia-595-server modules compatible with the vmware-7.0 flavour.

Package: linux-modules-nvidia-595-vmware
Description-md5: dda16eb9184f60adccc35ffad3eef8e6
Description-en: Extra drivers for nvidia-595 for the vmware flavour
 Install extra signed nvidia-595 modules compatible with the vmware flavour.

Package: linux-modules-nvidia-595-vmware-7.0
Description-md5: 83c905c9501904327d66fdcc5560415a
Description-en: Extra drivers for nvidia-595 for the vmware-7.0 flavour
 Install extra signed nvidia-595 modules compatible with the vmware-7.0 flavour.

Package: linux-modules-zfs-unsigned-vmware
Description-md5: d1607a6dd124bb4a14aa7a17c192ec75
Description-en: Extra drivers for zfs for the vmware flavour
 Install extra signed zfs modules compatible with the vmware flavour

Package: linux-modules-zfs-vmware
Description-md5: d1607a6dd124bb4a14aa7a17c192ec75
Description-en: Extra drivers for zfs for the vmware flavour
 Install extra signed zfs modules compatible with the vmware flavour

Package: linux-objects-nvidia-580-7.0.0-1003-vmware
Description-md5: d0af3bade17824d510ca9d6460babb5f
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-580-open-7.0.0-1003-vmware
Description-md5: 52c6dd1e16e3e8925b559efecba1f5c2
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-580-server-7.0.0-1003-vmware
Description-md5: 99bf472367781226f7fc09289ffa67bf
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-server-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-580-server-open-7.0.0-1003-vmware
Description-md5: 63b2fa7eb814e80a0bc4de4ca6ca28d2
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-580-server-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-595-7.0.0-1003-vmware
Description-md5: c70218bbd536556d991ad646ee91b6ba
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-595-open-7.0.0-1003-vmware
Description-md5: 30f7587281a02a51aa37dad5b0e5ed78
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-595-server-7.0.0-1003-vmware
Description-md5: ffa9ca5e7c9525e9729a55b1688a115f
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-server-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-objects-nvidia-595-server-open-7.0.0-1003-vmware
Description-md5: 8f83adfcf803445c0b3c4575f1209011
Description-en: Linux kernel nvidia modules for version 7.0.0-1003 (objects)
 This package contains the Linux kernel nvidia modules for version 7.0.0-1003.
 .
 You likely do not want to install this package directly. Instead, install the
 one of the linux-modules-nvidia-595-server-open-vmware* meta-packages,
 which will ensure that upgrades work correctly, and that supporting packages are
 also installed.

Package: linux-signatures-nvidia-7.0.0-1003-vmware
Description-md5: 091f19f21e799ac5db9e7919c5dce81d
Description-en: Linux kernel signatures for nvidia modules for version 7.0.0-1003-vmware
 This package contains the Linux kernel signatures nvidia modules for
 version 7.0.0-1003-vmware.
 .
 You likely do not want to install this package directly.

Package: linux-tools-7.0.0-1003-vmware
Description-md5: 1aecc6e915ecf79f9a7bea607b5b29fe
Description-en: Linux kernel version specific tools for version 7.0.0-1003
 This package provides the architecture dependant parts for kernel
 version locked tools (such as x86_energy_perf_policy) for
 version 7.0.0-1003.

Package: linux-tools-vmware
Description-md5: 673474a953fd8c8cf85f0520dd124f7c
Description-en: VMWare Linux kernel tools
 This package will always depend on the latest VMWare kernel tools
 available.

Package: linux-tools-vmware-7.0
Description-md5: 673474a953fd8c8cf85f0520dd124f7c
Description-en: VMWare Linux kernel tools
 This package will always depend on the latest VMWare kernel tools
 available.

Package: linux-vmware
Description-md5: 41a9b970ac9d17f5b7556f6be1633b29
Description-en: Complete VMWare Linux kernel and headers
 This package will always depend on the latest complete VMWare Linux kernel
 and headers.

Package: linux-vmware-7.0
Description-md5: 41a9b970ac9d17f5b7556f6be1633b29
Description-en: Complete VMWare Linux kernel and headers
 This package will always depend on the latest complete VMWare Linux kernel
 and headers.

Package: linux-vmware-cloud-tools-7.0.0-1003
Description-md5: 8087bd177dbf52f1977e6ce84d6edca0
Description-en: Linux kernel version specific cloud tools for version 7.0.0-1003
 This package provides the architecture dependant parts for kernel
 version locked tools for cloud tools for version 7.0.0-1003.
 You probably want to install linux-cloud-tools-7.0.0-1003-<flavour>.

Package: linux-vmware-headers-7.0.0-1003
Description-md5: 23de3565dc4b62d19b00a40e4d8ef4f4
Description-en: Header files related to Linux kernel version 7.0.0
 This package provides kernel header files for version 7.0.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-vmware-headers-7.0.0-1003/debian.README.gz for details

Package: linux-vmware-tools-7.0.0-1003
Description-md5: fd462dd2c5ad78571b77f40697178d5b
Description-en: Linux kernel version specific tools for version 7.0.0-1003
 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 7.0.0-1003.
 You probably want to install linux-tools-7.0.0-1003-<flavour>.

Package: lomiri-telephony-service
Description-md5: d4b0445bdf3b6e4a33fcacf2cf88db48
Description-en: Telephony service components for Lomiri - service daemon
 Telephony service components for Lomiri.
 .
 This package contains the backend components providing the telephony
 features such as calling and texting.

Package: lomiri-thumbnailer-service
Description-md5: 8a6bfd248ce60644880fa594ef9e1c74
Description-en: D-Bus service for out of process thumbnailing
 Lomiri Thumbnailer is an API for the Lomiri operating environment to
 create and cache image thumbnails for local and remote media.
 .
 This package provides thumbnailer D-Bus service that can provide
 thumbnails on behalf of another process.

Package: lua5.5
Description-md5: 130003bb49100d21ad1dd4ef09dee02f
Description-en: Simple, extensible, embeddable programming language
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains the Lua command line interpreter and bytecode compiler.
 Install it if you are developing or using Lua scripts.

Package: mesa-drm-shim
Description-md5: 02a636d160b665ddd114dec858ed10b1
Description-en: DRM shim libraries
 This package provides drm-shim libraries which can be used for testing DRM
 drivers when none exists on the host.

Package: mesa-opencl-icd
Description-md5: 10fe1749fa432fa001ccca2f3b268b84
Description-en: free implementation of the OpenCL API -- ICD runtime
 This package contains the mesa implementation of the OpenCL (Open Compute
 Language) library, which is intended for use with an ICD loader. OpenCL
 provides a standardized interface for computational analysis on graphical
 processing units.

Package: metview
Description-md5: 4ce04e442ecad0f65501d065fffe6dd1
Description-en: Interactive data visualization and analysis environment,
 Metview has been designed as a flexible, modular and extendible system
 able to accommodate the evolving needs of the user.
 The system is based on the ECMWF standards for graphics (Magics) and
 data access (MARS) but can also access locally stored data.
 The user interface is based on Motif and Qt. Metview is a
 fully distributed system where modules can run on different workstations
 and servers.
 .
 Metview is a cooperative project between ECMWF and INPE/CPTEC, Brazil.
 ECMWF has also been assisted by a staff member of Météo-France.

Package: metview-data
Description-md5: de58bbb93806f5fb6268e18d9b80dcb7
Description-en: Data needed for the Metview data analysis environment
 Metview has been designed as a flexible, modular and extendible system
 able to accommodate the evolving needs of the user.
 The system is based on the ECMWF standards for graphics (Magics) and
 data access (MARS) but can also access locally stored data.
 The user interface is based on Motif and Qt. Metview is a
 fully distributed system where modules can run on different workstations
 and servers.
 .
 This package provides data files needed for metvieww.

Package: neutron-macvtap-agent
Description-md5: e60c41b51b193c7b7bd59c74ab9bbcd9
Description-en: Neutron is a virtual network service for Openstack - Macvtap L2 Agent
 Neutron is a virtual network service for Openstack, and a part of
 Netstack. Just like OpenStack Nova provides an API to dynamically
 request and configure virtual servers, Neutron provides an API to
 dynamically request and configure virtual networks. These networks
 connect "interfaces" from other OpenStack services (e.g., virtual NICs
 from Nova VMs). The Neutron API supports extensions to provide
 advanced network capabilities (e.g., QoS, ACLs, network monitoring,
 etc.)
 .
 This package provides the Macvtap L2 Agent.

Package: neutron-metering-agent
Description-md5: 65dae36f4a24be77bcb88d08a02f05f3
Description-en: Neutron is a virtual network service for Openstack - metering agent
 Neutron is a virtual network service for Openstack, and a part of
 Netstack. Just like OpenStack Nova provides an API to dynamically
 request and configure virtual servers, Neutron provides an API to
 dynamically request and configure virtual networks. These networks
 connect "interfaces" from other OpenStack services (e.g., virtual NICs
 from Nova VMs). The Neutron API supports extensions to provide
 advanced network capabilities (e.g., QoS, ACLs, network monitoring,
 etc.)
 .
 This package provides the metering agent.

Package: neutron-ovn-agent
Description-md5: f37bb656bec6673216dfb7a85a978f8d
Description-en: OpenStack virtual network service - OVN agent
 Neutron provides an API to dynamically request and configure virtual networks.
 These networks connect "interfaces" from other OpenStack services (such as
 vNICs from Nova VMs). The Neutron API supports extensions to provide advanced
 network capabilities, including QoS, ACLs, and network monitoring.
 .
 This package provides the OVN agent.

Package: neutron-ovn-maintenance-worker
Description-md5: 57611fd2885f7d5d014f2568da7f062b
Description-en: Neutron is a virtual network service for Openstack - OVN maintenance worker
 Neutron is a virtual network service for Openstack, and a part of
 Netstack. Just like OpenStack Nova provides an API to dynamically
 request and configure virtual servers, Neutron provides an API to
 dynamically request and configure virtual networks. These networks
 connect "interfaces" from other OpenStack services (e.g., virtual NICs
 from Nova VMs). The Neutron API supports extensions to provide
 advanced network capabilities (e.g., QoS, ACLs, network monitoring,
 etc.)
 .
 This package provides the OVN maintenance worker and should be used
 when running Neutron API under WSGI for OVN deployments.

Package: neutron-plugin-ml2
Description-md5: 04c3b1da612333dffe94afb38e17f6ee
Description-en: Neutron is a virtual network service for Openstack - ML2 plugin
 Neutron is a virtual network service for Openstack, and a part of
 Netstack. Just like OpenStack Nova provides an API to dynamically
 request and configure virtual servers, Neutron provides an API to
 dynamically request and configure virtual networks. These networks
 connect "interfaces" from other OpenStack services (e.g., virtual NICs
 from Nova VMs). The Neutron API supports extensions to provide
 advanced network capabilities (e.g., QoS, ACLs, network monitoring,
 etc.)
 .
 This package provides the Modular Layer 2 plugin.

Package: neutron-sriov-agent
Description-md5: 42989299f1b85c4fc6eccec9138ca534
Description-en: Neutron is a virtual network service for Openstack - SR-IOV agent
 Neutron is a virtual network service for Openstack, and a part of
 Netstack. Just like OpenStack Nova provides an API to dynamically
 request and configure virtual servers, Neutron provides an API to
 dynamically request and configure virtual networks. These networks
 connect "interfaces" from other OpenStack services (e.g., virtual NICs
 from Nova VMs). The Neutron API supports extensions to provide
 advanced network capabilities (e.g., QoS, ACLs, network monitoring,
 etc.)
 .
 This package provides the Mellanox SR-IOV agent.

Package: openrazer-daemon
Description-md5: 1815948141db962d7bbb282f74f11156
Description-en: OpenRazer peripheral drivers (daemon)
 OpenRazer is a collection of GNU/Linux drivers for the Razer devices.
 Supported devices include keyboards, mice, mouse-mats, headsets and
 various other devices.
 .
 This package provides a user-space daemon used to interface with the driver.
 It contains a systemd user unit and an AppStream file.

Package: openrazer-doc
Description-md5: a0ec3f78d05e17c516cb274575c3f755
Description-en: OpenRazer peripheral drivers (documentation)
 OpenRazer is a collection of GNU/Linux drivers for the Razer devices.
 Supported devices include keyboards, mice, mouse-mats, headsets and
 various other devices.
 .
 This package contains scripts on how to interact with the daemon and
 the driver.

Package: openrazer-driver-dkms
Description-md5: 7d405851056343f52bb907a59691d54a
Description-en: OpenRazer peripheral drivers (DKMS)
 OpenRazer is a collection of GNU/Linux drivers for the Razer devices.
 Supported devices include keyboards, mice, mouse-mats, headsets and
 various other devices.
 .
 This package provides the source code for the OpenRazer kernel module to be
 build with dkms. Kernel sources or headers are required to compile this
 module.
 .
 Please read the Troubleshooting Guide in
 /usr/share/doc/openrazer-driver-dkms/README.Debian.

Package: openrazer-meta
Description-md5: d711d58e2ae1d7a398e04812de3708a2
Description-en: OpenRazer peripheral drivers (metapackage)
 OpenRazer is a collection of GNU/Linux drivers for the Razer devices.
 Supported devices include keyboards, mice, mouse-mats, headsets and
 various other devices.
 .
 This package is a metapackage which depends on the OpenRazer driver and
 userspace daemon, plus a Python library and documentation.

Package: ovmf-legacy
Description-md5: 2483e1903778611af8a30304f53d75bd
Description-en: UEFI firmware for 64-bit x86 VMs, enabling legacy features
 Open Virtual Machine Firmware is a build of EDK II for 64-bit x86 virtual
 machines. It includes support for UEFI and enables legacy features, such as
 ParaVirtual SCSI (PVSCSI), that might not be fully supported by the upstream
 developers. Therefore, this legacy firmware is provided on an as-is basis.

Package: ovmf-legacy-hwe
Description-md5: edfb9c9f0fcd6219cdabb64de7d85203
Description-en: UEFI firmware for 64-bit x86 VMs, enabling legacy features
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 Open Virtual Machine Firmware is a build of EDK II for 64-bit x86 virtual
 machines. It includes support for UEFI and enables legacy features, such as
 ParaVirtual SCSI (PVSCSI), that might not be fully supported by the upstream
 developers. Therefore, this legacy firmware is provided on an as-is basis.

Package: packagekit-command-not-found
Description-md5: f46269a57fdaac0b45bc1962744cdaf3
Description-en: Offer to install missing programs automatically
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package contains a simple handler for command_not_found that offers to
 install missing packages on the command line using PackageKit.

Package: packagekit-gtk3-module
Description-md5: b4094b413124ff3eeddd6dcdb91ab037
Description-en: Install fonts automatically using PackageKit
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 The PackageKit GTK+ module allows any Pango application to install
 fonts from configured repositories using PackageKit.

Package: pipewire-audio-client-libraries
Description-md5: 0732b1c01b478a2ed0c129a9fe3a209f
Description-en: transitional package for pipewire-alsa and pipewire-jack
 PipeWire is a server and user space API to deal with multimedia
 pipelines.
 .
 This is a transitional package for pipewire-alsa and pipewire-jack.
 It can safely be removed.

Package: pipewire-jack
Description-md5: acc44f7143ade87554934b4b71d66351
Description-en: PipeWire JACK plugin, for JACK applications to output via PipeWire
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains a plugin for JACK applications to output via PipeWire.

Package: pipewire-libcamera
Description-md5: 0aa4b5bae7b9f41e7390bea4f78d206f
Description-en: transitional package for libspa-0.2-libcamera
 PipeWire is a server and user space API to deal with multimedia
 pipelines.
 .
 This is a transitional package for libspa-0.2-libcamera.
 It can safely be removed.

Package: pipewire-system-services
Description-md5: 99c6357e56bfbb5b777901c2a2949cea
Description-en: audio and video processing engine multimedia server (system services)
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains the systemd system services. NOTE: This is NOT the
 recommended way to use PipeWire, but these services are provided for specific
 use cases like embedded and accessibility.

Package: pipewire-tests
Description-md5: 5d0a13850b762e4211c904f541a2b90b
Description-en: PipeWire multimedia server - tests and examples
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains automated and manual tests and example programs.

Package: pipewire-v4l2
Description-md5: 17978fbe0dce8313a6f723359aa6aa78
Description-en: PipeWire V4L2 plugin
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
 - Making available sources of audio and video (such as from a capture devices
 or application provided streams) and multiplexing this with clients.
 - Accessing sources of audio and video for consumption.
 - Generating graphs for audio and video processing.
 .
 This package contains the V4L2 plugin.

Package: pkg-rocm-tools
Description-md5: 364e01e77c952a4b8d0e89dd4aea1045
Description-en: Utilities for adding ROCm support to packages
 This package contains various utilities which should facilitate
 adding ROCm support in packages.
 .
 These include:
 * rocm-test-launcher Launches tests making use of AMD GPUs, and
 optionally exports system information
 .
 Currently, this only works with amd64 guests on amd64 hosts.

Package: plasma-calendar-addons
Description-md5: 6b9d2bbc2dc97d4b4ab4ef4c73c8cd63
Description-en: additional calendar plugins for Plasma 6
 This package contains additional Plasma 6 calendar plugins that are used in
 the Plasma desktop.
 .
 This package contains the following calendars:
 * Alternate Calendar
 * Astonomical Calendar
 .
 This package is part of the KDE Plasma 6 addons module.

Package: plasma-dataengines-addons
Description-md5: d430d4ef38c4348f77119a9376361e7e
Description-en: additional data engines for Plasma
 This package contains additional Plasma data engines shipped in Plasma 6
 addons module. These engines are needed by some Plasma 6 widget shipped with
 plasma-widgets-addons, but they may be useful for any other Plasma widgets too.
 .
 This package is part of the KDE Plasma addons module.

Package: plasma-desktop
Description-md5: 75fe427efb7974561485d1b970aaa5b3
Description-en: Tools and widgets for the desktop
 Plasma Desktop offers a beautiful looking desktop
 that takes complete advantage of modern computing technology.
 Through the use of visual effects and scalable graphics,
 the desktop experience is not only smooth but also pleasant
 to the eye. The looks of Plasma Desktop not only provide beauty,
 they are also used to support and improve your computer
 activities effectively, without being distracting.
 .
 This package is part of the KDE Plasma.

Package: plasma-desktop-data
Description-md5: cad6c75732e5a71a9a37cfb4f253e9f5
Description-en: Tools and widgets for the desktop data files
 Plasma Desktop offers a beautiful looking desktop
 that takes complete advantage of modern computing technology.
 Through the use of visual effects and scalable graphics,
 the desktop experience is not only smooth but also pleasant
 to the eye. The looks of Plasma Desktop not only provide beauty,
 they are also used to support and improve your computer
 activities effectively, without being distracting.
 .
 This package is part of the KDE Plasma.
 .
 This package contains the data files

Package: plasma-desktop-dev
Description-md5: 75fe427efb7974561485d1b970aaa5b3
Description-en: Tools and widgets for the desktop
 Plasma Desktop offers a beautiful looking desktop
 that takes complete advantage of modern computing technology.
 Through the use of visual effects and scalable graphics,
 the desktop experience is not only smooth but also pleasant
 to the eye. The looks of Plasma Desktop not only provide beauty,
 they are also used to support and improve your computer
 activities effectively, without being distracting.
 .
 This package is part of the KDE Plasma.

Package: plasma-desktoptheme
Description-md5: a15d5f4558d300bd70c5c317ba2f78ee
Description-en: Plasma Runtime components
 Plasma library and runtime components based upon KF6 and Qt 6.

Package: plasma-discover
Description-md5: 8111f4209298dca825ceca6e9c4b0d0d
Description-en: Discover software management suite
 Discover is a graphical software manager for the Plasma workspace.
 It helps users easily and quickly find applications and other software
 they might want to install.
 .
 By allowing to navigate a software library by search, categories, top lists
 along with detailed application information that includes screenshots
 and reviews, users can more quickly find applications that suit their needs.
 .
 Discover will also keep the system up to date by notifying about updates and
 installing them.

Package: plasma-discover-backend-flatpak
Description-md5: cdd8d9b57583bd55acd9c15059d460ff
Description-en: Discover software management suite - Flatpak backend
 Discover is a graphical software manager for the Plasma workspace.
 It helps users easily and quickly find applications and other software
 they might want to install.
 .
 This package contains a backend for the Flatpak application
 bundling system.

Package: plasma-discover-backend-fwupd
Description-md5: c33b0eb6ff25ba0f371acfed07b17123
Description-en: Discover software management suite - fwupd backend
 Discover is a graphical software manager for the Plasma workspace.
 It helps users easily and quickly find applications and other software
 they might want to install.
 .
 This package contains a backend for the firmware update daemon.

Package: plasma-discover-backend-snap
Description-md5: f76f0631fc4193fd2037c869ac2c3802
Description-en: Discover software management suite - Snap backend
 Discover is a graphical software manager for the Plasma workspace.
 It helps users easily and quickly find applications and other software
 they might want to install.
 .
 This package contains a backend for the Ubuntu Core Snappy application
 bundling system.

Package: plasma-discover-common
Description-md5: ffc34718f68c0332fe13b596308e45ba
Description-en: Discover software manager suite (common data files)
 Discover is a graphical software manager for the Plasma workspace.
 .
 This package contains data files shared by various parts of the
 Discover suite.

Package: plasma-discover-notifier
Description-md5: 64ccc61628d83aa13a41c7843a1e830e
Description-en: Discover software management suite - Update Notifier
 Discover is a graphical software manager for the Plasma workspace.
 It helps users easily and quickly find applications and other software
 they might want to install.
 .
 By allowing to navigate a software library by search, categories, top lists
 along with detailed application information that includes screenshots
 and reviews, users can more quickly find applications that suit their needs.
 .
 Discover will also keep the system up to date by notifying about updates and
 installing them.
 .
 This package contains the update notifier and indicator.

Package: plasma-keyboard
Description-md5: 95156d4099a78f22ddb73f1df187d1b1
Description-en: On-screen virtual keyboard for KDE Plasma
 The plasma-keyboard is a virtual keyboard based on Qt Virtual
 Keyboard designed to integrate in Plasma.

Package: plasma-nm
Description-md5: 5b69e791c531a8effeb4e7a37b16cd62
Description-en: Plasma network connections management
 plasma-nm provides a Plasma applet written in QML for managing network
 connections using Network Manager.
 .
 This package is part of the KDE Plasma.

Package: plasma-runners-addons
Description-md5: ec39ea6dfdc27e2a0c509bc6f778ee5a
Description-en: additional runners for Plasma 6 and Krunner
 This package contains additional Plasma runners that are used in krunner
 (the "run command" dialog of Plasma) to reveal special search results.
 If you use krunner a lot, you will probably like this package.
 .
 This package contains the following runners:
 * Special Characters
 * Unit Converter
 * Date and Time
 * Dictionary
 * Kate Sessions
 * Konsole Profiles
 * Spell Checker
 .
 This package is part of the KDE Plasma 6 addons module.

Package: plasma-session-wayland
Description-md5: b80d5abbd8cd3222fc58ae7bfe2f039e
Description-en: Plasma Workspace for KF6
 Plasma Workspace for KF6. Workspaces provide
 support for KDE Plasma Widgets, integrated search,
 hardware management and a high degree of customizability.
 .
 This package contains the Wayland session files.

Package: plasma-session-x11
Description-md5: abcdb5331b23a87ebf3265636d92b6c7
Description-en: Plasma Workspace for KF6
 Plasma Workspace for KF6. Workspaces provide
 support for KDE Plasma Widgets, integrated search,
 hardware management and a high degree of customizability.
 .
 This package contains the X11 session files.

Package: plasma-systemmonitor
Description-md5: 1b72d6233a49c7dc69ba7fcd6903e3da
Description-en: System monitor for the Plasma desktop
 Plasma System Monitor provides an interface for monitoring system sensors,
 process information and other system resources.

Package: plasma-wallpapers-addons
Description-md5: 0716175b259538d55e6507116bbf4f47
Description-en: additional wallpaper plugins for Plasma 6
 This package contains additional Plasma 6 wallpaper plugins that are used in
 the Plasma desktop.
 .
 This package contains the following wallpaper plugins:
 * Haenau
 * Hunyango
 * Picture of the Day
 .
 This package is part of the KDE Plasma 6 addons module.

Package: plasma-widgets-addons
Description-md5: 31a773b9579cc637c307ca08b1e93f0a
Description-en: additional widgets for Plasma 6
 This package contains additional Plasma 6 widgets shipped in the Plasma
 addons module. Install it if you want a variety of widgets on your Plasma
 desktop.
 .
 This package provides the following widgets:
 * Application Dashboard
 * Binary Clock
 * Calculator
 * Color Picker
 * Comic Strip
 * Dictionary
 * Disk Quota
 * Fifteen Puzzle
 * Fuzzy Clock
 * Grouping Plasmoid
 * Kate Sessions
 * Keyboard Indicator
 * Konsole Profiles
 * Lock Keys Status
 * Media Frame
 * Quicklaunch
 * Sticky Note
 * Timer
 * User Switcher
 * Weather Report
 * Web Browser
 .
 This package is part of the KDE Plasma 6 addons module.

Package: plasma-widgets-addons-dev
Description-md5: 7ec869b8453fd7b68faa225c864c14ce
Description-en: additional widgets for Plasma 6 - development files
 This package contains the development headers for the shared libraries
 shipped with the additional Plasma 6 widgets from the Plasma addons module.
 .
 This package is part of the KDE Plasma 6 addons module.

Package: plasma-workspace
Description-md5: a89adb51b3aeecb7eab229b988e35249
Description-en: Plasma Workspace for KF6
 Plasma Workspace for KF6. Workspaces provide
 support for KDE Plasma Widgets, integrated search,
 hardware management and a high degree of customizability.

Package: plasma-workspace-data
Description-md5: 7d5e09909bc050ddacab4816044dfcd4
Description-en: Plasma Workspace data files
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This contains the data files for Plasma Workspace.

Package: plasma-workspace-dev
Description-md5: 82023509dbf5994741ccb932df00c3f3
Description-en: Plasma Workspace development files
 Plasma Workspace is used as the base for Plasma Desktop, Mobile, and
 Bigscreen. It contains shared KCM configuration screens, applets as
 well as multiple libraries.
 .
 This package contains the development files for Plasma Workspace.

Package: powerdevil
Description-md5: a5a7ab9c20fe881a9218c8a292272bb1
Description-en: KDE power management service for Plasma
 PowerDevil is the internal name of the KDE power management service
 for Plasma. It is responsible for some (but not all) interactions
 with hardware functionality.
 .
 The service will:
 .
 - Suspend or shut down sessions under certain conditions such as
 user inactivity, closing the laptop lid or pressing the power button.
 .
 - Adjust the brightness level of displays and keyboards, or turn
 display backlights off/on altogether.
 .
 - Change settings according to the current power state (plugged in,
 battery, low battery), which can be customized in System Settings.
 .
 - Monitor the current battery charge, and set charge thresholds for
 battery-powered devices that support it.
 .
 - Keep track of system state - e.g. suspend/idle/etc. inhibitors,
 activities, screen locking - to adjust power management behaviors
 accordingly.
 .
 - Communicate with underlying services such as UPower,
 power-profiles-daemon, ddcutil, and/or systemd to implement some of
 the above.
 .
 - Provide a D-Bus interface for other Plasma components such as the
 Power Management applet or the Brightness and Color applet.
 .
 This package contains the daemon started alongside the Plasma
 session.

Package: powerdevil-data
Description-md5: b9068ebfeb24888b7cae8d5db90bf77f
Description-en: data files for the KDE power management service for Plasma
 PowerDevil is the internal name of the KDE power management service
 for Plasma. It is responsible for some (but not all) interactions
 with hardware functionality.
 .
 This package contains the data files for PowerDevil.

Package: powerdevil-dev
Description-md5: b620d8ed8ac5b1bf492a65242fb4d86d
Description-en: development files for the KDE power management service for Plasma
 PowerDevil is the internal name of the KDE power management service
 for Plasma. It is responsible for some (but not all) interactions
 with hardware functionality.
 .
 This package contains the development files for PowerDevil.

Package: powerline
Description-md5: 3d51644f102a622f93ac123f4d229abf
Description-en: prompt and statusline utility
 Powerline is a statusline plugin for vim, and provides statuslines and prompts
 for several other applications, including zsh, bash, tmux, IPython, Awesome and
 Qtile.

Package: powerline-doc
Description-md5: 531c87e92c397e2015d069f175f74577
Description-en: prompt and statusline utility (documentation)
 Powerline is a statusline plugin for vim, and provides statuslines and prompts
 for several other applications, including zsh, bash, tmux, IPython, Awesome and
 Qtile.
 .
 This package contains the HTML documentation, incorporates instructions on how
 to customize Powerline for various applications.

Package: python-cogent-doc
Description-md5: c500b1c82c580b2eec9f3cdab53c4831
Description-en: docs for python3-cogent3
 PyCogent is a software library for genomic biology.
 .
 It is distinguished by many unique built-in capabilities (such as true codon
 alignment) and the frequent addition of entirely new methods for the analysis
 of genomic data.
 .
 This package contains documentation and examples.

Package: python-taurus-doc
Description-md5: 63df9b4b695debd45bfe80c7499b4540
Description-en: Framework for scientific/industrial CLIs and GUIs - Documentation
 Taurus is a Python framework for control and data acquisition CLIs
 and GUIs in scientific/industrial environments. It supports multiple
 control systems or data sources: Tango, EPICS, ...  New control
 system libraries can be integrated through plugins.
 .
 This package contains the documentation for the taurus Python module.

Package: python3-access2base
Description-md5: 246df49fbae225481daa8c0393afe81e
Description-en: interface between Python and the LibreOffice Access2Base library
 Access2Base is a LibreOffice/OpenOffice Basic library of macros for
 (business or personal) application developers and advanced users.
 .
 Their syntax and their meaning are directly inspired by MSAccess.
 The macros are callable from
 - a LibreOffice / OpenOffice Base application,
 - any LibreOffice / OpenOffice document wanting to access data
 stored in databases.
 .
 This package contains an interface between Python (user) scripts
 and Access2Base.

Package: python3-audit
Description-md5: fd94855bbf9417e3ba14572436002335
Description-en: Python3 bindings for security auditing
 The package contains the Python3 bindings for libaudit and libauparse, which
 are used to monitor systems for security related events. Python can be used to
 parse and process the security event messages.

Package: python3-cluster
Description-md5: 0519ad521b7880cca0ae0513f9312627
Description-en: allows grouping a list of arbitrary objects into related groups (clusters)
 python-cluster is a "simple" package that allows users to create several groups
 (clusters) of objects from a list. It's meant to be flexible and able to
 cluster any object. To ensure this kind of flexibility, you need not only to
 supply the list of objects, but also a function that calculates the similarity
 between two of those objects. For simple datatypes, like integers, this can be
 as simple as a subtraction, but more complex calculations are possible. Right
 now, it is possible to generate the clusters using a hierarchical clustering
 and the popular K-Means algorithm. For the hierarchical algorithm there are
 different "linkage" (single, complete, average and uclus) methods available.
 .
 This is the Python 3 compatible package.

Package: python3-cogent3
Description-md5: e38d55aca43601238c4c188921c44cc8
Description-en: framework for genomic biology
 PyCogent is a software library for genomic biology. It is a fully
 integrated and thoroughly tested framework for:
 * controlling third-party applications,
 * devising workflows; querying databases,
 * conducting novel probabilistic analyses of biological sequence
 evolution, and
 * generating publication quality graphics.
 It is distinguished by many unique built-in capabilities (such as true codon
 alignment) and the frequent addition of entirely new methods for the analysis
 of genomic data.

Package: python3-fastparquet
Description-md5: 3651548d1250fb7492d5ab338ef6fdd3
Description-en: python implementation of the parquet format
 This is a python implementation of the parquet format, aiming
 integrate into python-based big data work-flows. It is used
 implicitly by the projects Dask, Pandas and intake-parquet.
 .
 This module offers a high degree of support for the features of the
 parquet format, and very competitive performance, in a small install
 size and codebase.

Package: python3-gnocchi
Description-md5: 6b5b41cf44ea17b675fc0d051108811c
Description-en: Metric as a Service - Python 3
 Gnocchi is a service for managing a set of resources and storing metrics about
 them, in a scalable and resilient way. Its functionalities are exposed over an
 HTTP REST API.
 .
 This package contains the Python 3 module.

Package: python3-libipa-hbac
Description-md5: 212cdd41ce04657029030f82f6a07c23
Description-en: Python3 bindings for the FreeIPA HBAC Evaluator library
 The libipa_hbac-python contains the bindings so that libipa_hbac can be
 used by Python applications.
 .
 This package installs the library for Python 3.

Package: python3-libsss-nss-idmap
Description-md5: 9dc7d17bee37f7358268401ea7fe5b96
Description-en: Python3 bindings for the SID lookups library
 This package contains the bindings for libnss_sss_idmap to be used by
 Python applications.
 .
 This package installs the library for Python 3.

Package: python3-litestar-htmx
Description-md5: 85aadc464bedf17015293d1c6e5095ba
Description-en: HTMX Integration for Litestar
 The Litestar framework supports Plugins, ships with dependency injection,
 security primitives, OpenAPI schema generation, MessagePack, middlewares, a
 great CLI experience, and much more.
 .
 HTMX is a JavaScript library that gives you access to AJAX, CSS
 Transitions, WebSockets and Server Sent Events directly in HTML, using
 attributes, so you can build modern user interfaces with the simplicity and
 power of hypertext.
 .
 This package provides Python bindings for the Litestar package to interact
 with the HTMX functionalities.

Package: python3-openrazer
Description-md5: 0d16626103a60ab0df16372f91ebe96b
Description-en: OpenRazer peripheral drivers (Python 3)
 OpenRazer is a collection of GNU/Linux drivers for the Razer devices.
 Supported devices include keyboards, mice, mouse-mats, headsets and
 various other devices.
 .
 This package contains a library for interacting with the OpenRazer daemon.

Package: python3-powerline
Description-md5: 8b992f10873009e4613dca7bd94fb318
Description-en: prompt and statusline utility (Python 3.x module)
 Powerline is a statusline plugin for vim, and provides statuslines and prompts
 for several other applications, including zsh, bash, tmux, IPython, Awesome and
 Qtile.
 .
 This package contains the Powerline module for Python 3.x.

Package: python3-pyzstd
Description-md5: 87c6b94f3ab30a6212d7910ce432399a
Description-en: Facebook's Zstandard (or zstd as short name) algorithm
 Python bindings to Zstandard (zstd) compression library, the API
 style is similar to Python's bz2/lzma/zlib modules.
 .
 Pyzstd module provides classes and functions for compressing and
 decompressing data, using Facebook's Zstandard (or zstd as short
 name) algorithm.

Package: python3-scriptforge
Description-md5: 97e0d75f97d05ddf0ead3ba75f99a8fb
Description-en: interface between Python and the LibreOffice ScriptForge library
 ScriptForge libraries build up an extensible collection of macro scripting
 resources for LibreOffice to be invoked from Basic macros or Python scripts.
 .
 This package contains the public scriptforge python library.

Package: python3-taurus
Description-md5: 4ab6fc26f2479e037b2502e717c13f63
Description-en: Framework for scientific/industrial CLIs and GUIs - Python3
 Taurus is a Python framework for control and data acquisition CLIs
 and GUIs in scientific/industrial environments. It supports multiple
 control systems or data sources: Tango, EPICS, ...  New control
 system libraries can be integrated through plugins.
 .
 This is the Python 3 version of the package.

Package: python3-unbound
Description-md5: af30f925fc4c43d06de34592670b36e8
Description-en: library implementing DNS resolution and validation (Python3 bindings)
 Python3 extension module for libunbound.
 .
 libunbound performs and validates DNS lookups; it can be used to convert
 hostnames to IP addresses and back and obtain other information from the
 DNS. Cryptographic validation of results is performed with DNSSEC.

Package: python3-virtualenvwrapper
Description-md5: f1b91c63c7253bb85e30e91b149a3e51
Description-en: extension to virtualenv for managing multiple environments (Py3)
 virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv
 tool. The extensions include wrappers for creating and deleting
 virtual environments and otherwise managing your development
 workflow, making it easier to work on more than one project at a time
 without introducing conflicts in their dependencies.
 .
 This package installs the library for Python 3.

Package: qemu-block-supplemental
Description-md5: 791f640e3740ce06209511d5a07656b8
Description-en: supplemental block backend modules for qemu-system and qemu-utils
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides supplemental block device backend modules for qemu-system
 emulation and qemu-img from qemu-utils package.
 .
 Currently, the following modules are shipped in this package:
 block-glusterfs block-blkio

Package: qemu-block-supplemental-hwe
Description-md5: 6baa0508c941d045afa6d070709f3db3
Description-en: supplemental block backend modules for qemu-system and qemu-utils
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides supplemental block device backend modules for qemu-system
 emulation and qemu-img from qemu-utils package.
 .
 Currently, the following modules are shipped in this package:
 block-glusterfs block-blkio

Package: qemu-efi-aarch64-hwe
Description-md5: dccdd89b279b31925f0302c441ccd4d2
Description-en: UEFI firmware for 64-bit ARM virtual machines
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 qemu-efi-aarch64 is a build of EDK II for 64-bit ARM virtual machines. It
 includes full support for UEFI, including Secure Boot.

Package: qemu-efi-loongarch64
Description-md5: 875c28378c239de9c3d87f72a88bfdea
Description-en: UEFI firmware for LoongArch64 virtual machines
 qemu-efi-loongarch64 is a build of EDK II for LoongArch64 virtual machines.

Package: qemu-efi-loongarch64-hwe
Description-md5: c2e4f5f5ecd14fe334ca393e2d544c8e
Description-en: UEFI firmware for RISCV64 virtual machines
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 qemu-efi-riscv64 is a build of EDK II for RISCV64 virtual machines.

Package: qemu-efi-riscv64-hwe
Description-md5: c2e4f5f5ecd14fe334ca393e2d544c8e
Description-en: UEFI firmware for RISCV64 virtual machines
 This package is part of the Ubuntu Virtualization
 Hardware Enablement variant, which provides the
 virtualization stack of future Ubuntu releases back to
 the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still
 refer to the base package names. In those cases, the
 base and -hwe package names should be considered
 interchangeable. The -hwe packages can fulfill
 dependencies to the base packages, no package is
 expected to directly depend on a -hwe suffixed package
 to keep them interchangeable.
 .
 qemu-efi-riscv64 is a build of EDK II for RISCV64 virtual machines.

Package: qemu-guest-agent
Description-md5: eaed171b226fde9768d213be2ee184b8
Description-en: Guest-side qemu-system agent
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides a daemon (agent) to run inside qemu-system
 guests (full system emulation).  It communicates with the host using
 a virtio-serial channel org.qemu.guest_agent.0, and allows one to perform
 some functions in the guest from the host, including:
 - querying and setting guest system time
 - performing guest filesystem sync operation
 - initiating guest shutdown or suspend to ram
 - accessing guest files
 - freezing/thawing guest filesystem operations
 - others.
 .
 Install this package on a system which is running as guest inside
 qemu virtual machine.  It is not used on the host.

Package: qemu-guest-agent-hwe
Description-md5: 940f3e755746e005788b29673ac3bb23
Description-en: Guest-side qemu-system agent
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides a daemon (agent) to run inside qemu-system
 guests (full system emulation).  It communicates with the host using
 a virtio-serial channel org.qemu.guest_agent.0, and allows one to perform
 some functions in the guest from the host, including:
 - querying and setting guest system time
 - performing guest filesystem sync operation
 - initiating guest shutdown or suspend to ram
 - accessing guest files
 - freezing/thawing guest filesystem operations
 - others.
 .
 Install this package on a system which is running as guest inside
 qemu virtual machine.  It is not used on the host.

Package: qemu-system-hwe
Description-md5: ce1eff9b0c6747e52664825327632c60
Description-en: QEMU full system emulation binaries
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This metapackage provides the full system emulation binaries for all supported
 targets, by depending on all per-architecture system emulation packages which
 QEMU supports.

Package: qemu-system-mips-hwe
Description-md5: e7f74b7c3264057575e8e03961da9ba3
Description-en: QEMU full system emulation binaries (mips)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 MIPS emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following mips hardware: mips mipsel mips64 mips64el.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-misc-hwe
Description-md5: f92b0c8432b2fe1d1cb09bfb456bd6fc
Description-en: QEMU full system emulation binaries (miscellaneous)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides the full system emulation binaries to emulate
 various other hardware which did not made into separate packages.
 Emulators for the following architectures are provided:
 alpha avr hppa m68k loongarch64 (loong64)
 microblaze microblazeel or1k rx sh4 sh4eb tricore xtensa xtensaeb.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-riscv-hwe
Description-md5: 805bf0f1a805b6d2dfe72acc6ae97c91
Description-en: QEMU full system emulation binaries (riscv)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 riscv emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following riscv hardware: riscv32 riscv64.

Package: qemu-system-sparc-hwe
Description-md5: 00c4cafe2ba15d3a743a5791228a11e9
Description-en: QEMU full system emulation binaries (sparc)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 SPARC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following sparc hardware: sparc sparc64.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-x86-xen
Description-md5: 27adb7f3674734cd12ad1dd4d5ecc76c
Description-en: QEMU full system emulation binaries (x86)
 The former qemu-system-x86-xen binaries are now in qemu-system-xen.
 .
 This is a transitional package. You can safely remove it.

Package: qemu-system-x86-xen-hwe
Description-md5: 5d21e90ac95a142dc3e798a94f281bc9
Description-en: QEMU full system emulation binaries (x86)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 The former qemu-system-x86-xen binaries are now in qemu-system-xen.
 .
 This is a transitional package. You can safely remove it.

Package: qemu-system-xen
Description-md5: aa7dcd7497006c10704a348f8ff89e3a
Description-en: QEMU full system emulation (Xen helper package)
 This package provides the i386 system emulation binary to work
 together with the Xen hypervisor for some types of DomUs.
 This package is not useful by its own.

Package: qemu-system-xen-hwe
Description-md5: 69c96ac98455834fb8fe2e99553de7b8
Description-en: QEMU full system emulation (Xen helper package)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 This package provides the i386 system emulation binary to work
 together with the Xen hypervisor for some types of DomUs.
 This package is not useful by its own.

Package: qemu-user
Description-md5: b5ae91329ebad9c1b179f0ba91f86d3e
Description-en: QEMU user mode emulation (static binaries)
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides statically linked user mode emulation binaries.
 In user mode QEMU can launch Linux processes compiled for one CPU
 on another CPU.
 .
 If qemu-user-binfmt package is also installed, it will register binary
 format handlers from this qemu-user package with the kernel automatically
 so it will be possible to run foreign binaries directly.  Without
 qemu-user-binfmt, it is possible to register certain binfmt(s) by installing
 symbolic links to /usr/share/qemu/binfmt.d/*.conf in /etc/binfmt.d/.

Package: qemu-user-binfmt
Description-md5: e64f16d60c78a6797d7047057c0d93fd
Description-en: QEMU user mode binfmt registration for qemu-user
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides binfmt support registration for the user-mode emulation
 binaries from qemu-user.  This package does not contain additional binaries,
 just (sym)links to binfmt registration data in /usr/lib/binfmt.d/ so it is
 picked up automatically by, eg, systemd.  Actual files are provided by
 qemu-user package.

Package: qemu-user-binfmt-hwe
Description-md5: 33b3aa5ae72410c94937e13036bd73ed
Description-en: QEMU user mode binfmt registration for qemu-user
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides binfmt support registration for the user-mode emulation
 binaries from qemu-user.  This package does not contain additional binaries,
 just (sym)links to binfmt registration data in /usr/lib/binfmt.d/ so it is
 picked up automatically by, eg, systemd.  Actual files are provided by
 qemu-user package.

Package: qemu-user-hwe
Description-md5: 9260008e7150d53f3f4bd20e5b7a1755
Description-en: QEMU user mode emulation (static binaries)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides statically linked user mode emulation binaries.
 In user mode QEMU can launch Linux processes compiled for one CPU
 on another CPU.
 .
 If qemu-user-binfmt package is also installed, it will register binary
 format handlers from this qemu-user package with the kernel automatically
 so it will be possible to run foreign binaries directly.  Without
 qemu-user-binfmt, it is possible to register certain binfmt(s) by installing
 symbolic links to /usr/share/qemu/binfmt.d/*.conf in /etc/binfmt.d/.

Package: qml-module-lomiri-telephony
Description-md5: 62faacb030037dbb206fb4b39d1bea9f
Description-en: Telephony service components for Lomiri - Telephony QML plugin
 Telephony service components for Lomiri.
 .
 This package contains the QML plugin providing the features from the telephony
 service to applications.

Package: qml-module-lomiri-telephony-phonenumber
Description-md5: 537a59c1c2c353ccf5fc83cd029d99a4
Description-en: Telephony service components for Lomiri - PhoneNumber QML plugin
 Telephony PhoneNumber components for Lomiri.
 .
 This package contains the QML plugin providing the features from the telephony
 PhoneNumber to applications.

Package: qml-module-lomiri-thumbnailer
Description-md5: 7ee717dbd74c9a75c529f3a1c7ec17a5
Description-en: QML interface for the thumbnailer
 Lomiri Thumbnailer is an API for the Lomiri operating environment to
 create and cache image thumbnails for local and remote media.
 .
 This package provides image providers that allow access to the
 thumbnailer from Qt Quick 2 / QML applications.

Package: redmine
Description-md5: 2ec6d8c12b41405de28a9f9eae41fce4
Description-en: flexible project management web application
 Redmine is a flexible project management web application. Written using Ruby
 on Rails framework, it is cross-platform and cross-database.
 .
 Dependencies for database support are provided by these metapackages:
 redmine-mysql, redmine-pgsql, redmine-sqlite.
 .
 Features
 * Multiple projects support
 * Flexible role based access control
 * Flexible issue tracking system
 * Gantt chart and calendar
 * News, documents & files management
 * Feeds & email notifications
 * Per project wiki
 * Per project forums
 * Time tracking
 * Custom fields for issues, time-entries, projects and users
 * SCM integration (SVN, CVS, Git, Mercurial, Bazaar and Darcs)
 * Issue creation via email
 * Multiple LDAP authentication support
 * User self-registration support
 * Multilanguage support

Package: redmine-mysql
Description-md5: 5334d370ac0b467914273b70a17e9522
Description-en: metapackage providing MySQL dependencies for Redmine
 This package only provides MySQL dependencies for Redmine, a
 flexible project management web application. Install this
 one if you want to use a MySQL database with Redmine.
 .
 Redmine package should be installed along with this package.

Package: redmine-pgsql
Description-md5: f308cd100ee4983a5adb6ff3370520bf
Description-en: metapackage providing PostgreSQL dependencies for Redmine
 This package provides PostgreSQL dependencies for Redmine, a
 flexible project management web application. Install this
 one if you want to use a PostgreSQL database with Redmine.
 .
 Redmine package should be installed along with this package.

Package: redmine-sqlite
Description-md5: 92a51359a57c7c0c86638eb96a7a1e4e
Description-en: metapackage providing sqlite dependencies for Redmine
 This package provides sqlite dependencies for Redmine, a
 flexible project management web application. Install this
 one if you want to use a sqlite database with Redmine.
 .
 Redmine package should be installed along with this package.

Package: rocm-cmake
Description-md5: c500c71f8060eaa91af23380c4779039
Description-en: AMD ROCm CMake modules
 rocm-cmake provides CMake modules for common build and development
 tasks within the ROCm project, such as setting version numbers,
 configuring CPack properties, and running static analysis tools.
 rocm-cmake is not typically required for building libraries or
 programs that use ROCm.

Package: rocm-podman-support
Description-md5: ff83f2a2439c2e250786d3202752f689
Description-en: Utilities for working with ROCm inside podman containers
 This package contains various utilities that facilitate working with
 ROCm packages inside podman containers, with a focus on rootless podman
 containers.
 .
 These include:
 * rocm-podman-setup    Prepare the system for GPU-in-container use
 * rocm-podman-create   Build podman images with GPU support
 * rocm-podman-run      Run a command in a container with GPU support
 .
 This package also includes autopkgtest-virt-qemu+podman, a specialized
 autopkgtest backend for running tests in a rootless podman container
 using the host GPU.
 .
 Currently, this only works with amd64 guests on amd64 hosts.

Package: rocm-qemu-support
Description-md5: b3b12aeb20f3323cdfcbb7d815135f4a
Description-en: Utilities for working with ROCm inside QEMU VMs
 This package contains various utilities that facilitate working with
 ROCm packages inside QEMU VMs.
 .
 These include:
 * rocm-qemu-setup    Prepare the system for GPU pass-through
 * rocm-qemu-create   Build QEMU images with GPU pass-through support
 * rocm-qemu-run      Boot a VM with GPU pass-through
 .
 This package also includes autopkgtest-virt-qemu+rocm, a specialized
 autopkgtest backend for running autopkgtests in a QEMU VM with GPU
 pass-through.
 .
 Currently, this only works with amd64 guests on amd64 hosts.

Package: sddm-theme-breeze
Description-md5: f3e099fc6dc7b19ee22d34e24babc94d
Description-en: Breeze SDDM theme
 Plasma Workspace for KF6. Workspaces provide
 support for KDE Plasma Widgets, integrated search,
 hardware management and a high degree of customizability.
 Taskmanager library.
 .
 This package contains the files for the breeze SDDM theme.

Package: sosreport
Description-md5: 1ccbc8cf84921866efc192bb260d4ceb
Description-en: transitional package for sos
 This is a transitional package, it can be safely removed.
 This currently ships the old commands that have been deprecated.

Package: sssd-idp
Description-md5: 85e1e169064e36070dddc5507d091974
Description-en: System Security Services Daemon -- Kerberos plugins for external id providers
 Provides Kerberos plugins that are required to enable authentication against
 external identity providers.

Package: sssd-kcm
Description-md5: 33bacd6e1ef4d2c4e5af5b7e63fc778f
Description-en: System Security Services Daemon -- Kerberos KCM server implementation
 Provides an implementation of a Kerberos KCM server. Use this package if
 you want to use the KCM: Kerberos credentials cache.

Package: sssd-passkey
Description-md5: e74d74f3e771b76f41f636748a8f6eaf
Description-en: System Security Services Daemon -- passkey helpers and plugins
 Provides the helper processes and Kerberos plugins that are required to
 enable authentication with a passkey token.

Package: systemd-boot
Description-md5: 0df90775ace126cb973183972b57f509
Description-en: simple UEFI boot manager - integration and services
 systemd-boot (short: sd-boot) is a simple UEFI boot manager. It provides a
 textual menu to select the entry to boot and an editor for the kernel command
 line. It supports systems with UEFI firmware only.
 .
 Installing systemd-boot will configure and install it in the ESP.
 .
 This package contains various tools and services to manage systems using
 systemd-boot, and serves as the main integration point to autoconfigure
 the system.

Package: systemd-boot-efi
Description-md5: 1a28c616cc5e8559e958ebd9ceb453da
Description-en: simple UEFI boot manager - EFI binaries
 systemd-boot (short: sd-boot) is a simple UEFI boot manager. It provides a
 textual menu to select the entry to boot and an editor for the kernel command
 line. It supports systems with UEFI firmware only.
 .
 This package contains the EFI binaries.

Package: systemd-boot-tools
Description-md5: 4729b9c85818fe3bc8df4aa7e00ee558
Description-en: simple UEFI boot manager - tools
 systemd-boot (short: sd-boot) is a simple UEFI boot manager. It provides a
 textual menu to select the entry to boot and an editor for the kernel command
 line. It supports systems with UEFI firmware only.
 .
 This package contains various tools to manage systems using systemd-boot.

Package: systemd-coredump
Description-md5: d366d36855090be1048ae8db5a78e930
Description-en: tools for storing and retrieving coredumps
 This package provides systemd tools for storing and retrieving coredumps:
 * systemd-coredump
 * coredumpctl

Package: systemd-homed
Description-md5: e71da21f82a0832ca7fcbdc41f810503
Description-en: home area manager
 systemd-homed is a system service designed to manage home directories. This
 package includes the homed service, a PAM module to automatically mount home
 directories on user login, tools and documentation.

Package: systemd-journal-remote
Description-md5: 73efab14dd1b4fafb3d541327b8812de
Description-en: tools for sending and receiving remote journal logs
 This package provides tools for sending and receiving remote journal logs:
 * systemd-journal-remote
 * systemd-journal-upload
 * systemd-journal-gatewayd

Package: systemd-repart
Description-md5: 6033d83496890808246e2de4437b8865
Description-en: Provides the systemd-repart and systemd-sbsign utilities
 systemd-repart is a configuration-driven system partitioning tool. It follows
 the Discoverable Partitions Specification and provides support for encryption
 and dm-verity among other things.
 .
 systemd-sbsign is an EFI binary signing tool.
 .
 systemd-keyutil is a tool to manipulate X.509 certificates.

Package: systemd-standalone-shutdown
Description-md5: 9ee6184f37c7f9760d9be532ffe4e801
Description-en: standalone shutdown binary for use in exitrds
 Standalone shutdown binary with minimal dependencies.
 This package conflicts with the main systemd package and is meant for use in
 minimal exitrd images. Not intended for normal systems.

Package: systemd-standalone-sysusers
Description-md5: 59eb167fc8fbdb9ddb8918d80524736d
Description-en: standalone sysusers binary for use in non-systemd systems
 Standalone sysusers binary with minimal dependencies.
 This package conflicts with the main systemd package and is meant for use in
 non-systemd systems.

Package: systemd-standalone-tmpfiles
Description-md5: e59a151e226689c494584c32d7f05a2c
Description-en: standalone tmpfiles binary for use in non-systemd systems
 Standalone tmpfiles binary with minimal dependencies.
 This package conflicts with the main systemd package and is meant for use in
 non-systemd systems.

Package: systemd-tests
Description-md5: ece07db851f8a2e9731975ec11eedb8d
Description-en: tests for systemd
 This package contains the test binaries. Those binaries are primarily used
 for autopkgtest and not meant to be installed on regular user systems.

Package: systemd-ukify
Description-md5: 39e5649d00705f557e265149601a82a3
Description-en: tool to build Unified Kernel Images
 This package provides ukify, a script that combines a kernel image, an initrd,
 with a command line, and possibly PCR measurements and other metadata, into a
 Unified Kernel Image (UKI).

Package: systemd-userdbd
Description-md5: 86b45a916ba4cb12ae812c532cd56008
Description-en: dynamic user/group manager
 systemd-userdbd is a system service that multiplexes user/group lookups to all
 local services that provide JSON user/group record definitions to the system.
 In addition it synthesizes JSON user/group records from classic UNIX/glibc NSS
 user/group records in order to provide full backwards compatibility. It may
 also pick up statically defined JSON user/group records from drop-in files.

Package: tone-generator
Description-md5: f9902be78e880aad722beb0e96bf93f1
Description-en: Telephony Tone Generator (daemon)
 Tone Generator is simple daemon which provides generation of playback
 tones for DTMF (dialer keypad tones), call progress indication, and
 other miscellaneous telephony-related tones.
 .
 Tone Generator is needed by the telephony stack of Lomiri.
 .
 This package provides the core daemon.

Package: tone-generator-scripts
Description-md5: 7b6ca4e379602861758e632fae2371d0
Description-en: Telephony Tone Generator (test scripts)
 Tone Generator is simple daemon which provides generation of playback
 tones for DTMF (dialer keypad tones), call progress indication, and
 other miscellaneous telephony-related tones.
 .
 Tone Generator is needed by the telephony stack of Lomiri.
 .
 This package provdes some test scripts.

Package: unbound
Description-md5: fbeecad8349f6b3042087b256bc69b68
Description-en: validating, recursive, caching DNS resolver
 Unbound is a recursive-only caching DNS server which can perform DNSSEC
 validation of results. It implements only a minimal amount of authoritative
 service to prevent leakage to the root nameservers: forward lookups for
 localhost, reverse for 127.0.0.1 and ::1, and NXDOMAIN for zones served by
 AS112. Stub and forward zones are supported.
 .
 This package contains the unbound daemon.

Package: unbound-anchor
Description-md5: f49fb3435120bde9cd4af959aeac719c
Description-en: utility to securely fetch the root DNS trust anchor
 unbound-anchor is a utility which securely fetches or updates the root DNS
 zone trust anchor. A copy of the current root anchor and root update
 certificate is embedded in unbound-anchor. RFC 5011 trust anchor tracking is
 performed, with fallback to an SSL fetch if this fails.

Package: unbound-host
Description-md5: 287e113772f55d3575bb8577560cb3eb
Description-en: reimplementation of the 'host' command
 This package provides the 'unbound-host' program that is bundled with the
 Unbound domain name server. This version differs from the one provided in the
 package called host, which is from NIKHEF, and bind9-host, which is from ISC,
 and has a similar but different set of features and options.

Package: virtiofsd
Description-md5: e96fb3b03e22bd9f7749d474cd901a23
Description-en: Virtio-fs vhost-user device daemon
 virtiofsd is a daemon for sharing host directories with a virtual machine or
 other guest using virtio-fs. It is designed to work with QEMU’s --device
 vhost-user-fs-pci but should work with any virtual machine monitor (VMM) that
 supports vhost-user.

Package: virtualenvwrapper
Description-md5: 29de2c2799a02bc581a13fd9176c536e
Description-en: extension to virtualenv for managing multiple environments
 virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv
 tool. The extensions include wrappers for creating and deleting
 virtual environments and otherwise managing your development
 workflow, making it easier to work on more than one project at a time
 without introducing conflicts in their dependencies.

Package: virtualenvwrapper-doc
Description-md5: 9dc1ab295026bcbef53283d4c56664be
Description-en: extension to virtualenv for managing multiple environments (docs)
 virtualenvwrapper is a set of extensions to Ian Bicking's virtualenv
 tool. The extensions include wrappers for creating and deleting
 virtual environments and otherwise managing your development
 workflow, making it easier to work on more than one project at a time
 without introducing conflicts in their dependencies.
 .
 This is the common documentation package.

Package: webkitgtk-webdriver
Description-md5: 088bf78d76ece6d47a2cd75d9dee0fbe
Description-en: WebKitGTK WebDriver support
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package provides the WebDriver service implementation for
 WebKitGTK.

Package: xdg-desktop-portal-kde
Description-md5: 85f9c7683ceeee9a23bab8e1e1840663
Description-en: backend implementation for xdg-desktop-portal using Qt
 xdg-desktop-portal-kde provides a Qt implementation for the
 desktop-agnostic xdg-desktop-portal service. This allows sandboxed
 applications to request services from outside the sandbox using KDE
 GUIs (app chooser, file chooser, print dialog) or using KDE services
 (session manager, screenshot provider).

Package: xdg-desktop-portal-wlr
Description-md5: 141dbaf309d78ef931459d7ea4b29b35
Description-en: xdg-desktop-portal backend for wlroots
 Support for the screenshot, screencast, and possibly remote-desktop
 xdg-desktop-portal interfaces for wlroots based compositors.

Package: xnest
Description-md5: 8fb9e95ed5f9c018992a8cdc83935474
Description-en: Nested X server
 Xnest is a nested X server that simply relays all its requests to another
 X server, where it runs as a client.  This means that it appears as another
 window in your current X session.  Xnest relies upon its parent X server
 for font services.
 .
 Use of the Xephyr X server instead of Xnest is recommended.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.

Package: xorg-server-source
Description-md5: 6be9dae6db2bfd4321ce1a5c689cbeb4
Description-en: Xorg X server - source files
 This package provides original Debian (with Debian patches already
 applied, and autotools files updated) sources for the X.Org ('Xorg')
 X server shipped in a tarball.  This enables other projects re-using
 X server codebase (e.g. VNC servers) to (re-)use officially
 Debian-supported version of the X xserver for their builds.
 .
 Unless you are building a software product using X server sources,
 you probably want xserver-xorg and/or xserver-xorg-core instead.

Package: xserver-xephyr
Description-md5: eeb7a5ed15c65f716761ab1fa1637b6b
Description-en: nested X server
 Xephyr is an X server that can be run inside another X server,
 much like Xnest. It is based on the kdrive X server, and as a
 result it supports newer extensions than Xnest, including render and
 composite.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.

Package: xserver-xorg-legacy
Description-md5: a49fa8443df84effdf1fd36e26ad0f94
Description-en: setuid root Xorg server wrapper
 This package provides a wrapper for the Xorg X server, which is
 necessary for legacy drivers and non-Linux kernels.

Package: xvfb
Description-md5: 1cd5b85acd06c23d376b7b5a7f30a0b8
Description-en: Virtual Framebuffer 'fake' X server
 Xvfb provides an X server that can run on machines with no display hardware
 and no physical input devices. It emulates a dumb framebuffer using virtual
 memory. The primary use of this server was intended to be server testing,
 but other novel uses for it have been found, including testing clients
 against unusual depths and screen configurations, doing batch processing with
 Xvfb as a background rendering engine, load testing, as an aid to porting the
 X server to a new platform, and providing an unobtrusive way to run
 applications that don't really need an X server but insist on having one
 anyway.
 .
 This package also contains a convenience script called xvfb-run which
 simplifies the automated execution of X clients in a virtual server
 environment. This convenience script requires the use of the xauth
 program.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.

Package: clickhouse-client
Description-md5: 6dceda8938e33615fa36694310e1e0cc
Description-en: column-oriented database system (cli client)
 ClickHouse is a column-oriented database management system that allows
 generating analytical data reports in real time.
 .
 This package provides ClickHouse CLI client.

Package: clickhouse-common
Description-md5: dafc4f101c8118146cf2903a05dfe5ed
Description-en: column-oriented database system (common files)
 ClickHouse is a column-oriented database management system that allows
 generating analytical data reports in real time.
 .
 This package provides common files for both ClickHouse server and client.

Package: clickhouse-server
Description-md5: 40ffe1390c0d529d732668d8ed763668
Description-en: column-oriented database system (server runner)
 ClickHouse is a column-oriented database management system that allows
 generating analytical data reports in real time.
 .
 This package provides ClickHouse server runner.

Package: clickhouse-tools
Description-md5: 55d77fef7c5729210736b725d9a3527a
Description-en: column-oriented database system (tools)
 ClickHouse is a column-oriented database management system that allows
 generating analytical data reports in real time.
 .
 This package provides various ClickHouse tools:
 - clickhouse-performance-test
 - clickhouse-benchmark
 - clickhouse-compressor
 - clickhouse-copier
 and some others.

Package: flash-kernel-piboot
Description-md5: db884766fbb0af653ae84909ccef976a
Description-en: transitional package
 This is a transitional package. It can be safely removed.

Package: gcc-mingw-w64-bootstrap
Description-md5: 627d18062f3fe28932ae78247ce8f9eb
Description-en: GNU Compiler Collection for MinGW-w64
 MinGW-w64 provides a development and runtime environment for 32- and
 64-bit Windows applications using the GNU Compiler Collection (gcc).
 .
 This package contains the GNU Compiler Collection, supporting
 cross-compiling to 32- and 64-bit MinGW-w64 targets. The bootstrap
 version of the package contains only the minimal C compiler required
 to build MinGW-w64.

Package: grub-efi-arm64-signed-template
Description-md5: 5f26229874a330dedc61233a338b2cb6
Description-en: GRand Unified Bootloader, version 2 (ARM64 UEFI signing template)
 This package contains template files for grub-efi-arm64-signed.
 This is only needed for Secure Boot signing.

Package: ignition-launch-cli
Description-md5: 58a5b2679542ab03c37010d229be92d2
Description-en: Ignition Robotics Launch Library - Launch cli
 Ignition Launch, a component of Ignition Robotics, provides a command line
 interface to run and manager application and plugins.
 .
 Package contains the ignition launch cli application

Package: libignition-gazebo-dev
Description-md5: 8ba4d9f9a00527803ae38cb007410427
Description-en: Ignition Gazebo classes and functions for robot apps - Development files
 Ignition Gazebo is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files

Package: libignition-gazebo-plugins
Description-md5: ed75f85997875eff7f6d998c9eef28e9
Description-en: Ignition Gazebo classes and functions for robot apps - Plugins
 Ignition Gazebo is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Plugins collection

Package: libignition-gazebo6-6
Description-md5: 5f37a7f9f59985df65ec850277bd2285
Description-en: Ignition Gazebo classes and functions for robot apps - Shared library
 Ignition Gazebo is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Main shared library

Package: libignition-launch-dev
Description-md5: 980577ac8b37422a77b797e25a67db00
Description-en: Ignition Robotics Launch Library - Development files
 Ignition Launch, a component of Ignition Robotics, provides a command line
 interface to run and manager application and plugins.
 .
 Package contains the ignition launch development files

Package: libignition-launch5-5
Description-md5: b1c4132c18a7f9ea2480e3a2dcb9fdc6
Description-en: Ignition Robotics Launch Library - Launch libraries
 Ignition Launch, a component of Ignition Robotics, provides a command line
 interface to run and manager application and plugins.
 .
 Package contains the ignition launch libraries

Package: linux-lowlatency-headers-6.8.0-20
Description-md5: dc19fa6de3cae9aa833d00daf7dfb93f
Description-en: Header files related to Linux kernel version 6.8.0
 This package provides kernel header files for version 6.8.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-lowlatency-headers-6.8.0-20/debian.README.gz for details

Package: mesa-teflon-delegate
Description-md5: eb218b8822219f66933bb2fbf65b5981
Description-en: Mesa TensorFlow Lite external delegate
 TensorFlow Lite delegate which can make use of NPUs to accelerate ML
 inference. It is implemented in the form of a external delegate, a shared
 library which the TensorFlow Lite runtime can load at startup.

Package: python3-uwsgidecorators
Description-md5: b6d60cbaaf5f0468faa6a7e19cf60424
Description-en: module of decorators for elegant access to uWSGI API (Python 3)
 uwsgidecorators is a simple Python module that exports a bunch of decorators
 to allow a more elegant approach to uWSGI API. Provided decorators helps with
 creating of RPC functions, timers, filemonitors.
 .
 This package provides uwsgidecorators module for Python 3.

Package: gstreamer1.0-adapter-pulseeffects
Description-md5: 7600aa151969b8eddcede93a45751854
Description-en: GStreamer adapter plugin
 Simple plugin that gives output buffers with the desired number of
 samples.
 .
 It is used in PulseEffects to ensure that the number of audio samples
 in the buffer is a power of 2. The convolver also needs it.
 .
 This package is part of the PulseEffects project.

Package: gstreamer1.0-autogain-pulseeffects
Description-md5: 6e5f3bf4a78ab41e85451ac1fe41f1a2
Description-en: GStreamer autogain plugin
 Simple GStreamer plugin that changes audio gain to match the levels
 recommended by the ebur128 standard.
 .
 This package is part of the PulseEffects project.

Package: gstreamer1.0-convolver-pulseeffects
Description-md5: 75bbadcb9fcad09d8632886791202257
Description-en: GStreamer convolver plugin
 Simple GStreamer crystalizer plugin based on the library of
 Zita-convolver.
 .
 This package is part of the PulseEffects project.

Package: gstreamer1.0-crystalizer-pulseeffects
Description-md5: ce19a24df2160b0b5ee3bcdb2f7b985e
Description-en: GStreamer crystalizer plugin
 Simple GStreamer plugin, useful to add more dynamic range
 to songs that were overly compressed.
 .
 This package is part of the PulseEffects project.

Package: pulseeffects
Description-md5: b8d7dfc9b25713d68c3180a148bb5e00
Description-en: Audio effects for PulseAudio applications
 PulseEffects is an advanced system-wide equalizer that works with
 PulseAudio. It can apply system-wide effects to all running application
 or selected apps.
 .
 PulseEffects also provides many pre-defined sound effects for PulseAudio
 input and output.

Package: qemu-system-mips-hwe
Description-md5: 0db8fbd17293139b4dedba193a6ff60a
Description-en: QEMU full system emulation binaries (mips)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 MIPS emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following mips hardware: mips mipsel.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-misc-hwe
Description-md5: 5d4b8485b636c0fb02c0abfe7d93a1cf
Description-en: QEMU full system emulation binaries (miscellaneous)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides the full system emulation binaries to emulate
 various other hardware which did not made into separate packages.
 Emulators for the following architectures are provided:
 avr m68k microblaze microblazeel
 or1k rx sh4 sh4eb tricore xtensa xtensaeb.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-riscv-hwe
Description-md5: 888767de1f21f70d5e67cc004a2b6b66
Description-en: QEMU full system emulation binaries (riscv)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 riscv emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following riscv hardware: riscv32.

Package: qemu-system-sparc-hwe
Description-md5: 372cf0c64067bb8c55e1360fdf7283dc
Description-en: QEMU full system emulation binaries (sparc)
 This package is part of the Ubuntu Virtualization Hardware Enablement
 variant, which provides the virtualization stack of future Ubuntu
 releases back to the Ubuntu LTS. The package names are suffixed with
 -hwe in comparison to the equivalent base packages.
 However, some documentation and manual pages may still refer to the base
 package names. In those cases, the base and -hwe package names should
 be considered interchangeable. The -hwe packages can fulfill dependencies
 to the base packages, no package is expected to directly depend on a -hwe
 suffixed package to keep them interchangeable.
 .
 QEMU is a fast processor emulator: currently the package supports
 SPARC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following sparc hardware: sparc.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: r-cran-tibble
Description-md5: f02fb4d466c84c52ac9908542537e13f
Description-en: Simple Data Frames
 Provides a 'tbl_df' class (the 'tibble') with stricter checking and better
 formatting than the traditional data frame.

Package: python3-tasmanian
Description-md5: 50c0f78b6ee31e11641e9f2af72c1f91
Description-en: Python interface to the Tasmanian sparse grids and DREAM modules
 The Toolkit for Adaptive Stochastic Modeling and Non-Intrusive ApproximatioN
 (Tasmanian) is a collection of robust libraries for high dimensional
 integration and interpolation as well as parameter calibration.
 .
 This package provides a Python interface to the Tasmanian sparse grids and
 DREAM modules.

Package: dnscap
Description-md5: 24eb705d172e0388560288b96e8543cb
Description-en: Network capture utility designed specifically for DNS traffic
 dnscap is a network capture utility designed specifically for DNS traffic. It
 produces binary data in pcap(3) format. This utility is similar to tcpdump(1),
 but has a number of features tailored to DNS transactions and protocol options.

Package: libghc-taffybar-dev
Description-md5: e2a9c1cbc2980e420cb32ecf2a7217df
Description-en: desktop bar extensible in Haskell
 This bar is based on gtk2hs and provides several widgets (including a few
 graphical ones).
 It also sports an optional snazzy system tray.
 .
 This package provides a library for the Haskell programming language.
 See http://www.haskell.org/ for more information on Haskell.

Package: libghc-taffybar-prof
Description-md5: 23ce08f0fb6d2950e1e75d2a8079aa51
Description-en: desktop bar extensible in Haskell; profiling libraries
 This bar is based on gtk2hs and provides several widgets (including a few
 graphical ones).
 It also sports an optional snazzy system tray.
 .
 This package provides a library for the Haskell programming language, compiled
 for profiling.  See http://www.haskell.org/ for more information on Haskell.

Package: librust-tokio-executor-dev
Description-md5: 1d0777a6d4941c1d599a024b61bd87bb
Description-en: Future execution primitives - Rust source code
 This package contains the source for the Rust tokio-executor crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: obs-move-transition
Description-md5: ab08fec88e4d58e5e081d5e8fab3f021
Description-en: plugin for OBS Studio to improve switching scenes
 This plugin moves sources to a new position during a scene transition,
 adding nice effects. If the 2 scenes contain a source with similar name
 (configured with settings) it will do the move the position and size
 between the 2 positions.
 .
 This filter can be added to a scene or a source to override the move
 transition for a source of the scene or the source global.
 .
 To use Move Transition, find for "Move" on "Scene Transitions" dock.

Package: taffybar
Description-md5: fd7ba658adfd5a29ca697ea4f3f4c221
Description-en: desktop bar extensible in Haskell
 This bar is based on gtk2hs and provides several widgets (including a few
 graphical ones).
 It also sports an optional snazzy system tray.
 .
 This package comes pre-configured with the default configuration. If you want
 to build your custom-configured version, make sure that libghc-taffybar-dev is
 installed and put your configuration in ~/.config/taffybar/taffybar.hs

Package: xmobar
Description-md5: 32ac199e8dddf9c37d0de0d4037fb8b3
Description-en: lightweight status bar for X11 window managers
 xmobar is a lightweight text-based status bar for X11 desktops written in
 Haskell and designed to work with (but not limited to) xmonad. It has a
 variety of plugins allowing the display of system-related data and an
 extensible architecture that makes it easy to write one's own plugins. xmobar
 supports displaying UTF-8 text and using TrueType fonts via Xft.

Package: freeorion
Description-md5: 23b79bf7ff13104e92bf18433717f5e5
Description-en: turn-based space empire and galactic conquest game
 FreeOrion is a turn-based space empire and galactic conquest (4X) game being
 designed and built by the FreeOrion project. FreeOrion is inspired by the
 tradition of the Master of Orion games, but is not a clone or remake of that
 series or any other game.
 .
 The game is about the construction of a living, breathing universe in a grand
 campaign model. You can develop your own galactic empire and explore new star
 systems with your fleets as one of several unique human or alien species.
 Colonization of new worlds, researching new technology, managing your
 resources and defending your planets against the AI or other human players on
 a galactic scale are your main objectives.

Package: libignition-gui-dev
Description-md5: feda608232ae7542cb618649a19a2bc9
Description-en: Ignition Gui classes and functions for robot apps - Development files
 Ignition Gui is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Package for development libraries and headers.

Package: libignition-gui6-6
Description-md5: a1785db80184ac84ff09bc2ef2702ff3
Description-en: Ignition Gui classes and functions for robot apps - Shared library
 Ignition Gui is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Package contains the main libraries

Package: libignition-sensors-air-pressure-dev
Description-md5: 7ef8439d5cf7d15ce02454d28114b52d
Description-en: Ignition sensors classes and functions for robot apps - Dev files air-pressure
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for air-pressure sensor

Package: libignition-sensors-altimeter-dev
Description-md5: e7e4bd4fb10ae6d525fd53df49e3f692
Description-en: Ignition sensors classes and functions for robot apps - Dev files altimeter
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for altimeter sensor

Package: libignition-sensors-camera-dev
Description-md5: 9a8b2d2bc7256e8d3be9e95a8de9da99
Description-en: Ignition sensors classes and functions for robot apps - Dev files Camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for Camera sensor

Package: libignition-sensors-core-dev
Description-md5: 045b0fe84d48ce2e398a6cd32cb62aba
Description-en: Ignition sensors classes and functions for robot apps - Development files
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Core development files

Package: libignition-sensors-depth-camera-dev
Description-md5: 0cb6de466a3cb3a15285645737d1a676
Description-en: Ignition sensors classes and functions for robot apps - Dev files depth-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for depth-camera sensor

Package: libignition-sensors-dev
Description-md5: b51a00c68154af6a66278ed2bef0391a
Description-en: Ignition sensors classes and functions for robot apps - Metapackage
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Metapackage for all the -dev files

Package: libignition-sensors-force-torque-dev
Description-md5: a68ff69ec3a7ac190752e37aead56407
Description-en: Ignition sensors classes and functions for robot apps - Dev files force-torque
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for force-torque sensor

Package: libignition-sensors-gpu-lidar-dev
Description-md5: 7c0a357103c919f224f14ccd4636a13c
Description-en: Ignition sensors classes and functions for robot apps - Dev files gpu-lidar
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for gpu-lidar sensor

Package: libignition-sensors-imu-dev
Description-md5: 2cb4aabeeda68b9203ced686aed19ec1
Description-en: Ignition sensors classes and functions for robot apps - Dev files imu
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for imu sensor

Package: libignition-sensors-lidar-dev
Description-md5: a97d47fe92f56af44e92d5c936cfb306
Description-en: Ignition sensors classes and functions for robot apps - Dev files lidar
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for lidar sensor

Package: libignition-sensors-logical-camera-dev
Description-md5: 520a4c764874076ef2a304550f1789a7
Description-en: Ignition sensors classes and functions for robot apps - Dev files logical-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for logical-camera sensor

Package: libignition-sensors-magnetometer-dev
Description-md5: 959672d6f8a3b26e7fc4e2d9ef834460
Description-en: Ignition sensors classes and functions for robot apps - Dev files magnetometer
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for magnetometer sensor

Package: libignition-sensors-navsat-dev
Description-md5: 7f056e5be5b7abc2cdf602b4d4ef786a
Description-en: Ignition sensors classes and functions for robot apps - Dev files navsat
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for NavSat (GPS) sensor

Package: libignition-sensors-rendering-dev
Description-md5: e8d69ff6a6c453c6791ed8ea937efcc4
Description-en: Ignition sensors classes and functions for robot apps - Dev files rendering
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for rendering sensor

Package: libignition-sensors-rgbd-camera-dev
Description-md5: f35c366810390c55e8eb96ba1b7a3e98
Description-en: Ignition Sensors classes and functions for robot apps - Dev files rgbd-camera
 Ignition Sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for rgbd-camera sensor

Package: libignition-sensors-segmentation-camera-dev
Description-md5: c99da2926ec257e587e2da1a5878e1ac
Description-en: Ignition sensors classes and functions for robot apps - Dev files segmentation-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for segmentation-camera sensor

Package: libignition-sensors-thermal-camera-dev
Description-md5: c6b83066508432d2887164583c32b21e
Description-en: Ignition sensors classes and functions for robot apps - Dev files thermal-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Development files for thermal-camera sensor

Package: libignition-sensors6-6
Description-md5: 11c0438fc30ca20a7a7b6a53c5a094a3
Description-en: Ignition sensors classes and functions for robot apps - Shared library
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.

Package: libignition-sensors6-air-pressure6
Description-md5: 6af3c8504ac71fac27ab75b3e27d3b55
Description-en: Ignition sensors classes and functions for robot apps - Lib air-pressure
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for air-pressure sensor

Package: libignition-sensors6-altimeter6
Description-md5: b5b40c004495caa2a0617bd41ac8fbc4
Description-en: Ignition sensors classes and functions for robot apps - Lib altimeter
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for altimeter sensor

Package: libignition-sensors6-camera6
Description-md5: e0cefdb7a9b8fee736a39c6a3e5d7894
Description-en: Ignition sensors classes and functions for robot apps - Lib Camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for Camera sensor

Package: libignition-sensors6-depth-camera6
Description-md5: fd36179ae2b4b263c991c031208c6557
Description-en: Ignition sensors classes and functions for robot apps - Lib depth-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for depth-camera sensor

Package: libignition-sensors6-force-torque6
Description-md5: 56926cbbacc74bdb19f6320d9d96e9eb
Description-en: Ignition sensors classes and functions for robot apps - Lib force-torque
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for force-torque sensor

Package: libignition-sensors6-gpu-lidar6
Description-md5: 94dc7b7ee619cf97c4bbd9b9aa1d48e2
Description-en: Ignition sensors classes and functions for robot apps - Lib gpu-lidar
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for gpu-lidar sensor

Package: libignition-sensors6-imu6
Description-md5: c3f7a8b0900b5bb22286690a7dad12a8
Description-en: Ignition sensors classes and functions for robot apps - Lib imu
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for imu sensor

Package: libignition-sensors6-lidar6
Description-md5: 09928d3bcb5434c27b4ee3f1b66284b0
Description-en: Ignition sensors classes and functions for robot apps - Lib lidar
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for lidar sensor

Package: libignition-sensors6-logical-camera6
Description-md5: d21596526c2a201792542dffbe8fb918
Description-en: Ignition sensors classes and functions for robot apps - Lib logical-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for logical-camera sensor

Package: libignition-sensors6-magnetometer6
Description-md5: 9f99ea765378626d5f99f4682048de90
Description-en: Ignition sensors classes and functions for robot apps - Lib magnetometer
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for magnetometer sensor

Package: libignition-sensors6-navsat6
Description-md5: 6dbd43dc17d2d05de6788cc0423ed621
Description-en: Ignition sensors classes and functions for robot apps - Lib navsat
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for NavSat (GPS) sensor

Package: libignition-sensors6-rendering6
Description-md5: 3bbd2907b87b38d1a3df1c97ab4918c5
Description-en: Ignition sensors classes and functions for robot apps - Lib rendering
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for rendering sensor

Package: libignition-sensors6-rgbd-camera6
Description-md5: 501dfc7a56ce94b12ca397b409807442
Description-en: Ignition Sensors classes and functions for robot apps - Lib rgbd-camera
 Ignition Sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for rgbd-camera sensor

Package: libignition-sensors6-segmentation-camera6
Description-md5: c33fab7ca9f229ab00c48de7041b65e7
Description-en: Ignition sensors classes and functions for robot apps - Lib segmentation-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for segmentation-camera sensor

Package: libignition-sensors6-thermal-camera6
Description-md5: 3d9f0ce4b4fd826a65199add2c4d5f7e
Description-en: Ignition sensors classes and functions for robot apps - Lib thermal-camera
 Ignition sensors is a component in the ignition framework, a set of libraries
 designed to rapidly develop robot applications.
 .
 Shared library for thermal-camera sensor

Package: librust-tokio-reactor-dev
Description-md5: 07eabb320ba20cc7e0ec5ba4953b5dff
Description-en: Event loop that drives Tokio I/O resources - Rust source code
 This package contains the source for the Rust tokio-reactor crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: postgresql-client-17
Description-md5: eaea3378475832005862cf031d1071c0
Description-en: front-end programs for PostgreSQL 17
 This package contains client and administrative programs for
 PostgreSQL: these are the interactive terminal client psql and
 programs for creating and removing users and databases.
 .
 This is the client package for PostgreSQL 17. If you install
 PostgreSQL 17 on a standalone machine, you need the server package
 postgresql-17, too. On a network, you can install this package on
 many client machines, while the server package may be installed on
 only one machine.
 .
 PostgreSQL is an object-relational SQL database management system.

Package: postgresql-server-dev-17
Description-md5: 4b83f4bbf28ca29441e563099103b8b8
Description-en: development files for PostgreSQL 17 server-side programming
 Header files for compiling SSI code to link into PostgreSQL's backend; for
 example, for C functions to be called from SQL.
 .
 This package also contains the Makefiles necessary for building add-on
 modules of PostgreSQL, which would otherwise have to be built in the
 PostgreSQL source-code tree.
 .
 PostgreSQL is an object-relational SQL database management system.

Package: python3-cypari2
Description-md5: 4ce72cd59d1d99bc5bef7cb61b958cd3
Description-en: Python interface to PARI -- Python 3
 A Python interface to the number theory library libpari.
 .
 This package installs the library for Python 3.

Package: wsjtx-improved
Description-md5: ed06eee3439ff809d201752fb1e87864
Description-en: Weak-signal amateur radio communications
 WSJT-X implements amateur radio communication protocols or "modes" called
 FST4, FST4W, FT4, FT8, JT4, JT9, JT65, Q65, MSK144, and WSPR, as well as one
 called Echo for detecting and measuring your own radio signals reflected from
 the Moon. These modes were all designed for making reliable, confirmed QSOs
 under extreme weak-signal conditions.
 .
 JT4, JT9, and JT65 use nearly identical message structure and source encoding
 (the efficient compression of standard messages used for minimal QSOs). They
 use timed 60-second T/R sequences synchronized with UTC. JT4 and JT65 were
 designed for EME ("moonbounce") on the VHF/UHF/microwave bands. JT9 is
 optimized for the MF, and HF bands. It is about 2 dB more sensitive than
 JT65 while using less than 10% of the bandwidth. Q65 offers submodes with a
 wide range of T/R sequence lengths and tone spacings.
 .
 FT4 and FT8 are operationally similar but use T/R cycles only 7.5 and 15 s
 long, respectively. MSK144 is designed for Meteor Scatter on the VHF bands.
 These modes offer enhanced message formats with support for nonstandard
 callsigns and some popular contests.
 .
 FST4 and FST4W are designed particularly for the LF and MF bands. On these
 bands their fundamental sensitivities are better than other WSJT-X modes with
 the same sequence lengths, approaching the theoretical limits for their rates
 of information throughput. FST4 is optimized for two-way QSOs, while FST4W is
 for quasi-beacon transmissions of WSPR-style messages. FST4 and FST4W do not
 require the strict, independent time synchronization and phase locking of
 modes like EbNaut.
 .
 WSPR mode implements a protocol designed for probing potential propagation
 paths with low-power transmissions. WSPR is fully implemented within WSJT-X,
 including programmable "band-hopping".
 .
 wsjt-x_improved is an enhanced version of the excellent WSJT-X software by Joe
 Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS and others.
 .
 Additional features in the "improved PLUS" version include:
 * Optional band switching buttons
 * Optional display of bars for Rx and Tx frequency on the waterfall
 * Improved behavior of the mouse buttons when clicking on the waterfall display
 * Advanced highlighting options
 * QSO wait features: Wait and Reply, Wait and Call, Wait and Pounce
 * Filters for band activity window
 * Ignore list
 * Map grid locators to U.S. States and Canadian Provinces
 * CQ: First / CQ: Max Dist / CQ: Max dB / CQ: Min dB
 * Dark style
 * Audible alerts
 * Cloudlog support
 * see homepage for a PDF with all new features